ASTM E165 NDT Cracked Aluminum Test Blocks Aluminum Alloy YM-A Dye Penetrant Testing NDT Cracked Aluminum Test Blocks Cracked Aluminum Test Blocks compare sensitivity of different penetrants or sensitivity of new and used penetrants. This is done by processing one half of the block with used penetrant and the other half with fresh penetrant. It is manufactured to meet the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
B5 AS2083/2005, BS2704/1978/1983 Chrome Plating Dye Penetrant Test Panels Material: Stainless steel with chrome plating Specification All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Material: Test Report according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth 100µm Width (target value)...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
PT-HST- Penetrant Testing Dye Flaw Detection Material With 12 Months Warranty
PT-HST- Dye Flaw Detection Material ·Solvent type, washable by water. ·High sensitivity, low F, C1 and S content, no odor, China-Japan formulation ·Package: 500m1aerosol ·1 set: 1 penetrate, 2 developer, 3 remover (caned) ·18L/barrel:(general package) ·Package: 600ml aerosol Standard: JB/T7523-2004 EN ISO3452-2 Penetrant testing test specimen YM-B YM-C YM-D YM-A...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Chrome Plating AS2083/2005, BS2704/1978/1983 Dye Penetrant Inspection Test Block
Chrome Plating AS2083/2005, BS2704/1978/1983 Dye Penetrant Inspection Test Block A test block with the size of 130mm×40mm×4mm and the material of 0Cr18Ni9Ti or other stainless steel materials was chromium plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The location numbers were 1, 2 and 3 in order of size. The position, spacing and other requirements...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
B3 Stainless Steel Chrome Plating Dye Penetrant Inspection AS2083/2005, BS2704/1978/1983 Main application: Dye penerant inspection Model:YM-B3 All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Type II Penetrant Testing EN 10204 ISO 3452-3 ISO Chrome Plating Cracked Dye Panels
Type II EN 10204 ISO 3452-3 ISO Panel Chrome Plating Cracked Penetrant Test Panels Type II Penetrate block : ISO 3452-3:2013(E),GB/T18851.3,JIS Z 2343-3:2001 The ISO Panel is made from a 0.100" (2.5 mm) stainless steel plate. Half of the test surface is hard coated with a 0.0024" (60 µm) hard alloy material. Five crack centers are evenly spaced in the hard coated strip. The crack centers are made up of circular patterns forming a star. Material:...
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
SPT Split Tube Complete For Standard Penetration Test Soil Sampling
SPT split tube Complete For Standard Penetration Test Soil Sampling Standard Penetration Test Standard Penetration Test The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil. This test is the most frequently used subsurface exploration drilling test performed worldwide. The test procedure is described in ISO 22476-3, ASTM D1586 and Australian...
ROSCHEN GROUP
Verified Supplier
65 EAST XINHUAN ROAD, SHANGHAI, CHINA
The cost of wireless charging CE-RED certification and the cycle of wireless charging CE-RED certification
CE certification for sweeping machines, ROHS certification for sweeping machines, FCC certification for sweeping machines, PSE certification for sweeping machines The following edition summarizes the relevant standards and procedures of CE certification for sweeping machines 1. Electrical safety testing: CE certification requires detailed testing of the electrical safety of sweeping robots. This includes testing the safety performance of...
Shenzhen ZKT Technology Co., Ltd.
No. H, 2nd Floor, 1st Building, Quanzhi Technology Innovation Park, Shasong Road, Houting, Shajing Street, Bao’an District, Shenzhen, China
Hair dryer CE certification fee, hair dryer CE certification cycle, hair dryer CE FCC ROHS certification
CE certification for sweeping machines, ROHS certification for sweeping machines, FCC certification for sweeping machines, PSE certification for sweeping machines The following edition summarizes the relevant standards and procedures of CE certification for sweeping machines 1. Electrical safety testing: CE certification requires detailed testing of the electrical safety of sweeping robots. This includes testing the safety performance of...
Shenzhen ZKT Technology Co., Ltd.
No. H, 2nd Floor, 1st Building, Quanzhi Technology Innovation Park, Shasong Road, Houting, Shajing Street, Bao’an District, Shenzhen, China
Stainless steel 316L elbow for dye penetration test+Pickling treatment
Product Description Stainless steel 316L elbow for dye penetration test+Pickling treatment Stainless steel 316L elbow for dye penetration test+Pickling treatment Product Name Pipe elbow Size 1/2"-24" seamless, 26"-60" welded Standard ANSI B16.9, EN10253-4, DIN 2605, GOST 17375-2001, JIS B2313, MSS SP 75, etc. Wall thickness SCH5S, SCH10S, SCH10, SCH40S, STD, XS, SCH80S, XXS, SCH20, SCH30, SCH40, SCH60, SCH80, SCH160, XXS and etc. Elbow 30° 45° 60...
Hebei Paris International Trading Co.,LTD
Wei 2 West road Xi Wang Industrial Zone ,Mengcun County,Cangzhou City ,Hebei Pro,China PR
Submit “dye penetrant testing procedure” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!