Business license check OK
1 - 10 Results for drilling and blasting from 2914 Products
Water Well Drill Mining Rotary Tri Tricone Drill Bit For Blast Hole And Well Drilling
Water Well Drill Mining Rotary Tri Tricone Drill Bit For Blast Hole And Well Drilling Product Description Drag Bits: ABC supplies a variety of drag bits for many types of projects drilling needs, including 3-wing type bits for soft and medium formations, 4-wing, especially 4-wing chevron type for harder formations. Each of our bits is machined from a forging to exacting standards and then tipped with tungsten carbide. Mining grade tungsten...
ANHUI BIWINTON INTERNATIONAL TRADE CO.,LTD
Verified Supplier
No. 3, Qiaowan Road, Economic & Technological Development Area, Hefei City, Anhui Pro. (231200), China
Underground mining Water Drilling Rig for Drilling and Blasting hole Drilling Rig
Drilling jumbo For Underground mining for Drilling and Blasting hole Drilling Rig Model: RS-100 Drilling jumbo Use: Drilling jumbos are usually used in underground mining, if mining is done by drilling and blasting. They are also used in tunneling, if rock hardness prevents use of tunneling machines. Description: A drilling jumbo consists of one, two or three rock drill carriages, sometimes a platform, which the miner stands on to load the holes...
ROSCHEN GROUP
Verified Supplier
65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Top Hammer Hydraulic Drilling Rig Blast Hole 24m Deep Crawler Mining DTH Drilling Rig
Top Hammer Hydraulic Drilling Rig Blast Hole 24m Deep Crawler Mining DTH drilling rig Open-pit hydraulic drill carriage is designed according to the operating conditions of small and medium-sized quarries and small open-pit mines,and is mainly used for drilling hard and medium-hard(F10 and above)rocks. It can be used for rock blasting and drilling in the construction of quarries,civil works,road projects, open-pit mines and hydro power plant,etc....
Quzhou Sanrock Heavy Industry Machinery Co., Ltd.
Verified Supplier
No.28, Wenyuan Road, Qujiang District, Quzhou City, Zhejiang Province,China
22mm Rock Drilling Tools Blast Hole Drilling Shank Plug Hole For Stone
22mm Rock Drilling Tools Blast Hole Drilling Shank Plug Hole For Stone Product Description Integral Drill Steels: Integral Drill Steel is mainly used in small-hole drilling, such as stone quarrying, foundation drilling, tunneling, underground mining, road cutting, and trenching and so on, and equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. It can reduces the expense of impact energy, improves the...
Beijing Jincheng Mining Technology Co., Ltd.
Verified Supplier
Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Mobile drilling rig blast hole depth 30meters hydraulic rotary borehole drilling equipment
Mobile drilling rig blast hole depth 30meters hydraulic rotary borehole drilling equipment At urban construction project, surface mining, quarries ,construction work sites,foundation pit construction, road slope protection project etc. As option for foundation bolting and anchoring,casing and large hole spiral drilling. Products Description Product name:R86 Separated Crawler Drilling Rig Name:R86 Brand Name:Sanrock Type:Rotary Drilling Rig...
Quzhou Sanrock Heavy Industry Machinery Co., Ltd.
Verified Supplier
No.28, Wenyuan Road, Qujiang District, Quzhou City, Zhejiang Province,China
QL50 152mm DTH Button Bits 5 Inch Bits For Concrete Drilling And Blasting
QL50 152mm DTH Button Bits 5 Inch Bits For Concrete Drilling And Blasting In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. QL50 Technical Parameter of bits assorted QL50 Spherical button/Concave face 130 5 1/8 4×14...
KSQ Technologies (Beijing) Co. Ltd
Verified Supplier
Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Hex22mm / Hex25mm Rock Tapered Drill Rod , Blast Hole Drilling Tapered Rod
Hex22mm / Hex25mm Rock Tapered Drill Rod , Blast Hole Drilling Tapered Rod Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit from spinning. • Suitable for small hole range • Widely used in Dimensional Stone Quarrying Industry • Widely used in Underground...
KSQ Technologies (Beijing) Co. Ltd
Verified Supplier
Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
GT60 140mm Drop Centre Retract Bits Button bits for Mining Drilling and Blast Hole Drilling
GT60 140mm Drop Centre Retract Bits Button bits for Mining Drilling and Blast Hole Drilling Roschen is one of the professional manufacturers & suppliers of rock drilling tools, tungsten carbide button bits, DTH bits, DTH hammers, rock tools, coal mining tools, mining rock tools, quarrying tools, machine tools, DTH hammers & bits, retrac button bits, thread button bits, tapered button bits, chisel bits, cross bits, thread cross bits, tapered cross...
ROSCHEN GROUP
Verified Supplier
65 EAST XINHUAN ROAD, SHANGHAI, CHINA
115mm Tungsten Alloy Rock Drill Bit Blast Hole DTH Hammer Bit
115mm Tungsten Alloy Rock Drill Bit Blast Hole DTH Hammer Bit DTH Drill Bit Product Information: DTH hammers transmit intensive impact energy with low energy loss. This results in good rock breakage, high penetration rates and high productivity. There are mainly four types of end face design forms used by down-the-hole drill bits: namely, end face convex type, end face plane type, end face concave type and end face deep concave center type....
HEBEI MINETECH MACHINERY TECHNOLOGY CO., LTD
Verified Supplier
No. 466 Zhongshan Road, Shijiazhuang, Hebei, China
Rock Bolting Machine
Product parameters Model: 90/105/140-300MM Applicable rock: F=6-20 Drilling diameter: 90-300mm Working pressure: 0.7-2.4MPA Gas consumption: 7-21M3/MIN Equipped with impactors: CIR, DHD Powerhead rotation speed: 0-70RPM Powerhead output torque rejection: 3600-6500 (N-M) Drilling depth: 3-30M Drill pipe length (optional): 2; 3; 4; 6; 9M Rail travel (optional): 2; 3; 4; 6; 9M Application field: Open air: blasting drilling, static fracturing...
Shanxi Xingjin Technology Trading Co.，Ltd
Submit “drilling and blasting” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
