Add to Cart
Micro DC Worm Gear Motor With Encoder 6V 12V 24V Reversible Adjustable Speed Power-Off Self-Locking Dustproof With Back Cover
Specification:
Voltage: DC6V, DC12V, DC24V
No-Load Speed: 6rpm, 10rpm, 18rpm, 23rpm, 30rpm, 40rpm, 90rpm, 150rpm
Error: ±10%
Output Shaft Diameter: 6mm D-type
Output Shaft Length: 14mm
Gearbox Size:46*32*25mm
Wirings:
Red Wire - positive power supply of motor(+)
Black Wire - negative power supply of motor(-)
Green Wire - negative power supply of encoder(-) (positive and negative power supply of encoder do not allow connect wrong;
Blue Wire - positive power supply of encoder(+) (positive and negative power supply of encoder do not allow connect wrong,(5-12v)
Yellow Wire - signal feedback (11 signals per motor turns a circle)
White Wire - signal feedback (11 signals per motor turns a circle)
The following is the connection introduction of the encoder
① Red line: the positive pole of the motor is connected to the
positive pole of the power supply +
② Black wire: the negative pole of the motor is connected to the
negative pole of the power supply -
③ Green line: Connect sensor ground wire - (5-12V)
④ Blue line: connect sensor power + (5-12V)
⑤Yellow line: signal A output point (11 pulses)
⑥ White line: signal B output point (11 pulses)
Datasheet :
Type | Model:JGY-370S | Parameter | |||||||||
Voltage | No Load | Load Torque | Stall | Reducer | |||||||
Rated | Speed | Current | Speed | Current | Torque | Output | Torque | Current | Ratio | size | |
Volt.V | rpm | mA | rpm | mA | kg.cm | W | kg.cm | A | 1:00 | mm | |
660 | 6V | 160 | 60 | 128 | 300 | 0.2 | 2 | 3 | 2 | 37.3 | 46 |
6V | 100 | 60 | 80 | 300 | 0.5 | 2 | 6 | 2 | 60 | 46 | |
6V | 40 | 60 | 32 | 270 | 0.8 | 2 | 15 | 2 | 150 | 46 | |
6V | 24 | 60 | 19 | 270 | 2 | 2 | 20 | 2 | 250 | 46 | |
6V | 19 | 60 | 15 | 270 | 4.5 | 2 | 30 | 2 | 324 | 46 | |
6V | 10 | 60 | 8 | 260 | 6.7 | 2 | 60 | 2 | 600 | 46 | |
6V | 6 | 60 | 5 | 260 | 9 | 2 | ban | 2 | 972 | 46 | |
6V | 4 | 60 | 3 | 260 | 15.9 | 2 | ban | 2 | 1700 | 46 | |
6V | 2 | 60 | 2 | 260 | 30 | 2 | ban | 2 | 2900 | 46 | |
1260 | 12V | 160 | 45 | 128 | 270 | 0.74 | 1.7 | 4 | 1.7 | 37.3 | 46 |
12V | 100 | 45 | 80 | 270 | 1 | 1.7 | 7 | 1.7 | 60 | 46 | |
12V | 40 | 45 | 32 | 230 | 2.2 | 1.7 | 11 | 1.7 | 150 | 46 | |
12V | 24 | 45 | 19 | 230 | 3.7 | 1.7 | 18 | 1.7 | 250 | 46 | |
12V | 19 | 45 | 15 | 230 | 4.8 | 1.7 | 24 | 1.7 | 324 | 46 | |
12V | 10 | 45 | 8 | 230 | 9 | 1.7 | ban | 1.7 | 600 | 46 | |
12V | 6 | 45 | 5 | 220 | 14 | 1.7 | ban | 1.7 | 972 | 46 | |
12V | 4 | 45 | 3 | 200 | 25 | 1.7 | ban | 1.7 | 1700 | 46 | |
12V | 2 | 45 | 2 | 200 | 43 | 1.7 | ban | 1.7 | 2900 | 46 | |
2460 | 24v | 160 | 26 | 128 | 180 | 0.4 | 1.5 | 2 | 1 | 37.3 | 46 |
24v | 100 | 26 | 80 | 180 | 0.8 | 1.5 | 4 | 1 | 60 | 46 | |
24v | 40 | 26 | 32 | 180 | 1.8 | 1.5 | 9 | 1 | 150 | 46 | |
24v | 24 | 26 | 19 | 180 | 3 | 1.5 | 15 | 1 | 250 | 46 | |
24v | 19 | 26 | 15 | 180 | 3.8 | 1.5 | 19 | 1 | 324 | 46 | |
24v | 10 | 26 | 8 | 180 | 7 | 1.5 | 35 | 1 | 600 | 46 | |
24v | 6 | 26 | 5 | 180 | 11 | 1.5 | ban | 1 | 972 | 46 | |
24v | 4 | 26 | 3 | 180 | 20 | 1.5 | ban | 1 | 1700 | 46 | |
24v | 2 | 26 | 2 | 180 | 40 | 1.5 | ban | 1 | 2900 | 46 |
① Name of the motor: Encoder DC Worm Geared Motor
② Rated voltage have DC 6V ; DC 12V and DC 24V
③ After you select the voltage of the motor, you can choose one of
the following speeds to purchase. The following speeds refer to the
no-load speed of the motor, not the load speed;
For example, 6RPM means that the motor rotates 6 times per minute
without load.
You can choose the no load speed have :
6rpm/10rpm/18rpm/23rpm/30rpm/40rpm/66rpm/90rpm/150rpm
Choose one of the speeds, there will be a corresponding load rated
torque, so when you choose the no-load speed of the motor, we
recommend that you refer to the load rated torque of the motor
according to the load of the project instead of the stall torque of
the motor.
The speed of the motor is different, and the torque of the motor is
also different. For example, the motor parameter you choose is 6v
6rpm, the torque of the motor is 25KG.CM, If the motor parameter
you choose is 6v 150rpm, and the torque of the motor is 0.2KG.CM.
So the lower the motor speed you choose, the greater the torque of
the motor. Conversely, the higher the speed you choose, the smaller
the torque of the motor.
Some people will have a doubt. If the maximum speed of this motor
is purchased, such as 150rpm, if we reduce the speed of the motor
from 150rpm to 6rpm, when the motor is running at 6rpm, can the
torque of the motor reach 25KG?
This is impossible. When the speed of the motor is adjusted, the
torque of the motor will also decrease as the speed decreases. For
example, the speed of the motor you bought is 150rpm, and the
torque of the motor is 0.2KG.CM. When you reduce the speed of the
motor, the torque of the motor will be lower than 0.2KG. If the
speed of the motor is greatly reduced, the torque of the motor will
also be greatly reduced.
If you buy the lowest speed of this motor, such as 6rpm, the torque
of the motor is 25KG, if you reduce the speed of the motor from
6rpm to 1rpm, the torque of the motor will also be lower than 25KG.
So you need to consider whether the final torque of the motor can
reach the load of your project after the motor is decelerated. If
not, you need to consider choosing other lower speeds or other
motors.
You can contact us about the principle of torque change with speed,
we can help you avoid buying mistakes, thanks!
④ Direction of rotation of the motor: CW Or CCW, Support Reversed;
Control the clockwise or counterclockwise rotation of the motor by
changing the way the positive and negative electrodes are connected
⑤ The motor has a self-locking function ;
After disconnect the power supply, the shaft can be securely
locked, can not easy to move by other force. When your project is
not connected to the power, you can make your project safely stay
somewhere. It can be used for some special purpose.Such as
Anti-theft sliding doors.
⑥ The shaft shape of the motor : D type, please refer to the size
chart below for all dimensions of the motor.
⑦ Gear material: Metal gears make the motor last longer
⑧ A dust cover is installed at the end of the motor to protect the
encoder.
⑨ The motor has standard noise when working. If your project has
requirements for the working noise of the motor, please consult us
before purchasing. We will give you some suggestions. Thank you.
When the motor is reversed, the working sound of the motor will be
greater than the forward rotation, which is normal.
⑩ This motor is suitable for a variety of micro-automation
equipment. As long as you confirm that the motor voltage and torque
of your choice are suitable for the voltage and load of your
project before purchase, there is no limit to the scope of use of
this motor.
For example, Electric curtains ; Billboard motors ; Household
appliances etc
FAQ
1. who are we?
We are based in Guangdong, China, start from 2005,sell to North
America(30.00%),Domestic Market(15.00%),Western
Europe(10.00%),Eastern Europe(10.00%),Northern
Europe(6.00%),Southern Europe(5.00%),Southeast Asia(5.00%),South
America(5.00%),Oceania(5.00%),South
Asia(4.00%),Africa(3.00%),Eastern Asia(2.00%). There are total
about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Gear Motor,DC Motor,Brushless Motor,Planetary Gear Motor,Worm Gear
Motor
4. why should you buy from us not from other suppliers?
Specialized in Micro DC motor, Dc Gearbox motor.We have been in
this industry for over 10 years,we have many experinec to provide
motors according to customer's requirements.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal;
Language Spoken:English,Chinese