IEC 62196 EV Connector Testing Equipment Plugs And Sockets Cable Pull And Torque 100mm
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1007
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
IEC 62196 New Energy Vehicles Plugs And Sockets Cable Pull And Torque Test Equipment
Complied Standards & Clauses
IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11,
IEC60309-1: 2012 clause 23.3, etc.
Technical Parameters
| Operation Method | Button operation |
| Drive Mode | Motor and cylinder |
| Pull Force Weights | 50N*1, 60N*1, 110N*1, 40N*2,110N*1 Can achieve 160N, 200N, 240N, 250N,500N |
| Torque Weights | 6N*1, 7N*1, 12N*1, 15N*1, 23N*1, 110N*1 Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m |
| Torque Arm | 100mm(Ф200mm) |
| Pull Frequency | 1cycle/s |
| Pull Cycles | 1-9999 cycles, can be preset, default 100 cycles |
| Torque Applied Time | 0-99H59M59S, can be preset, default 1min |
| Fixture | One set of universal fixture |
Equipment Overview
Samples and Restrictions: Electric vehicle charging interfaces (plug, socket-outlets, vehicle connectors), industrial purpose plugs, socket-outlets and couplers.
Application: To test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.
Test Principle: Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved using cylinders, trays, weights and time relays.
Structure: Pull force is applied through weights, torque is applied through weight and torque arm. The preset counter and the digital display time relay are used to control the cycles of pull test and the time of the torque test. The test cycles or the test time reaches the preset value, the apparatus will automatically stop testing. The maximum allowable displacement of the flexible cable of the plugs, socket-outlets and vehicle connectors shall not exceed the standard requirement after the test.
Use Environment: Power supply: AC220V±10%,50/60Hz, 1KW, or match client’s local power supply requirements
Working temperature 0-40°C, humidity 30%-90%
Dimensions: about W1600*D500*H1135mm
Weight: about 100kg
Questions & Answers
Q: What is the Torque Weights for this device?
A: One set of torque weights which Can achieve 0.6N.m, 0.7N.m, 1.2N.m,
1.5N.m, 2.3N.m, 11N.m.
Q: What is the Pull Frequency for this device?
A: It is 1cycle/s.
Details:
IEC 62196 EV Connector Testing Equipment Plugs And Sockets Cable Pull And Torque 100mm
Inquiry Cart
0