Add to Cart
Fully Automatic Corrugated Box Production Line 5 Ply Corrugation Machine
Model | Name | QTY | Feature |
HB-I | Hydraulic Mill Roll Stand ( with trolly and track) | 5SET | Main shaft diameter is 242mm,doublecurve heavy rocker arm, tooth
clip,mulitpoint brake, hydraulic lift, left and right translation. |
SP-1- 600 | Pre-heater | 4SET | The roller ¢600 mm, including the pressure vessel certificate; electric adjustment angle; angle can be adjusted within the range of 360 ° |
320CR | Single Facer | 2SET | Corrugated diameter is 320mm, 48CrMo high quality alloy steel; Adopt independent gearbox, universal joint drive structure; Airbag ballast structure, PLC automatic control glue; Steam heating |
SP-3-600 | Triplex Pre-heater | 1SET | The roller ¢600 mm, including the pressure vessel certificate; electric adjustment angle; angle can be adjusted within the range of 360 ° |
CGM-F | Duplex Gluer | 1SET | Glue roller dia. Is 269mm,carved 25 line pit type checker;Each layer of the independent variable frequency motor drive, glue clearance controlled by PLC and man-machine interface; Glue quantity of digital display. |
OHB | Duplex Conveying Bridge | 1SET | Main girer is 200mm box iron,independent frequency conversion motor drive paper transport, adsorption tension. Electric correction. |
HPM | Double Facer | 1SET | Hot plate 600 mm * 16 pcs; press rollers lift by pneumatic,compressed press rollers structure |
NTKM | NC Thin Blade Machine | 1SET | Sharping by computer, PLC control; Automatic follow the plant speed; Adopt tungsten carbide knive |
NC-120 | Duplex NC Cut-Off | 1SET | Full AC servo control, braking is energy storage type, suplex spiral cutter structure, oil-immersed gear transmission, a 10.4 -inch touch screen display. |
SMA | Duplex Automatic stacker (Gantry type) | 1SET | Duplex belt type stacking platform, AC servo control movements;Automatic paperboard side delivery when reach the setting quantity. |
ZJZ | Glue Making System | 1SET | Customer supply |
ZA | Internal Steam System | 1SET | Steam system components adopt GB valva; Contains rotary joint, up and down distributor , drain valve,steam trap and pressure gauge, etc.; Boiler and piping supply by customer |
MAIN SPECIFICATION
MODEL: SM150-1800-5 LAYER CORRUGATOR LINE
1. Manufacture width: 1800mm
2. Design speed: 150m/min Working speed:120m/min
3. Note: The roll paper which is used to test the production speed should meet following requirements:
* Grade: Min. B * Moisture content: 11% ± 2%
* Face paper: 100~250g/m2 * Liner paper: 100~150g/m2
* Corrugated paper: 100- 200g/m2
4. Flute profiles: B,C ,E flute(as per clients request)
5. Steam requirements
Steam consumption:2500kg/h Air compressor pressure:0.8~1.1Mpa
6. Electricity: 380V, 50Hz,three-phase four wire type
7. Equipment Direction:Left or Right transmission will be according to client’s requirements.
8. Factory request size:specific length as to the foundation of drawing