Remote Control PCB Control Board Multifunctional Clothes Rack Controller

Sterilizing power supply36VDC Multifunctional clothes rack controller,full function

This controlleris designed against intelligent electric clothes rack,it is a full-function master control which can control clothes rack though the remote control(433MHZ wireless reception).it's main control function include of UV lights and control,tec,with function integration.

Power supply motor is a AC-DC switching power supply,24VDC output constant current is 270ma,UV driver for UV light is DC-DC power supply, input 24VDC,output:8-12VDC 2outputs,300mA constant current.

Output parameter

Remarks:

a. Maximum continuous output power of power supply:83W;DC output ripple &noise test conditions;

b: Oscilloscope should be limited at 20MHZ bandwith;

c: At output terminals with parallel 0.1uF ceramic and 47uF electrolytic capacitors;

Combined load/Line Regulation

Technical characteristics

Input characteristics

Output characteristics

Wireless reception function

1. Wireless receiving frequency:433.92MHZ,System:ASK;

2. Wireless receiving frequency fluctuation :<5KHZ;

3. Close time:code time window between remode controller and receiving board in three seconds;

4. Controlling Distance:>20M

Protection function

1. Short circuit on AC port,power supply no outputm when relieved,power supply gets back to normal.

2. Motor alarm detection:when the motorpower supplycurrent into2.8+/-0.1A,the control board receives the alam singnal,alam every 2 sencods,until the alarm signal is eliminated

3. Moto overload protection: when the current from motor output part>3.1A.the control board receives the overload signal,immediately cuts the motor power supply and operales the motor without action within 30S;

4. Resistance bounce:similat the state of the clothes rack in the runing process by limit switch.when the block is encountered,the whose circuit board stops the motoraction imediately.later up running for 2S to eliminated the state of resistance.

Enter into standby

1. The controller enter into standby when it is electrified.

2. When all functions are tuned off,no operation for more 5 minutes,the main control panel is in standby state.

3. if the host get in to standby stadus ,whatever instructions the remode control sends ,the controller exits the standby state and enters normal working mode.

FAQ

Q1: How many year warranty of your Product?
A: Two years.

Q2: Do you have power factory?
A: Yes.We are OEM&ODM manufacturer in Chengdu.

Q3: Do you offer sample of power?
A: Yes.We offer free sample ,but you need pay the shippment.

Q4: Do you have any certification?
A: Yes.We have CE,ISO9001,ROHS,if you need other certification with large order,we can apply for it.

Chengdu Hao Li Electronic Technology Co., Ltd. is mainly engaged in the application design, development, production and sales of power supply and ultrasonic products. It has nearly 20 years of experience. It has in-depth cooperation with University of Electronic Science and Technology and Sichuan University. The products are mainly sold to Europe, the United States, Asia and other countries. The company has strong production capacity in power drive and intelligent control, application design of ultrasonic products, and can solve customization problems for customers.