Product : Card Issuing Machine / Card Dispenser & Collector for Kiosk
Motorised Card reader PT-A6 is a gathering of years’ experience
from technical development and market exploring in related
industries. It is a fulfillment of different functions in one
technical design. And its high reliability is guaranteed by its
durable materials, stable structural and electrical design. Plus
the LED design in its bezel, makes PT-A6 a right choice of market.
- Anti-skimming function achieved by card’s trembling entry.
- The extruding bezel prevents the card from skimming.
- The LED on the bezel helps to avoid the cards from being left in
- The independent sensor design offers an easier maintenance of card
reader. The transparant mirror on the sensor separates the dust and
other obstacles from the sensor
- The “dust prevent mechanical shutter” on the bezel raises the
- The four pairs of rollers working as drive roller, better guarantee
the reliability during transmission to prevent from card jam or
card ejection error.
- The adopted of “pure belting transmission” makes a smoother,
stabler, quieter transmission.
- The roller in front of the magnetic head enables card re-insertion
and re-read, improve card’s reading rate.
- Paris of rollers transmission can prevent abnormal card from
- The “self-balance magnetic head structure” makes the reader easy to
maintain and enhance the reading stability.
- The adopted of “high quality plastic” in the main body ensures the
reading accuracy and the uniformity of the card reader.
Card Type supported
|Magnetic card ISO-7811(Customization accepted for non-standard
|Contact IC card ISO-7816|
|Contactless IC card(RFID card) ISO-14443|
|Anti-fishing||A combination of “extruding bezel”&”trembling insertion”
effieciently avoid cards being fished. Only for model PT-A6L|
|Card insertion method||Magnetic signal check/Card width switch check|
|Card insertio mode|
PT-A6L :Trembling insertion,
PT-A6S: Normal insertion
|Card rejection mode||Front side reject with holding/front side reject without
holding/rear side insert with holding/rear side insert without
holding for options|
|Re-read function||Automatic card re-insertion and re-read function|
|Stub card||Automatic rejection of stub card and innormal card|
|Power off ejection||EPS needed for power off auto-ejection,|
|Power supply||DC12V±5% 2A|
|Circuit protect||Auto protection on circuit for reversed polarity or overtension|
|Transmission||The movement of upper drive roller and lower driven roller take the
|Lifetime||Magnetic head≥800,000 pass, contact chip≥500,000 pass|
|Working condition||Temperature/humidity -20℃--60℃/0-90% no-condensing|
|Storage condition||Temperature/humidity -30℃--70℃/0-90% no-condensing|
|Net weight||About 390g|
|Installation||See attached product assembling drawing|
Two detail Models :
PT-A6-S (Standard Model)
PT-A6-L (Anti-skimming model with "extruding bezel" and "trembling