Add to Cart
SAE 1045 1050 A36 4 x 8 steel sheet Cold Rolled Carbon Metal
Certain facts about welding of AISI 1045 steel are:
· AISI 1045 steel is readily welded when correct procedure is
followed.
· Welding AISI 1045 steel in through-hardened, tempered and flame
or induction hardened condition is not recommended.
· Low hydrogen electrodes are preferred for welding AISI 1045
steel.
· The workpiece is
· Pre-heated at 200° C-300° C (392° F - 572° F)
· Maintained at the same temperature during welding
· Cooled slowly using sand, ashes etc and
· Stress relieved at 550° C - 660° C (1022° F - 1220° F).
1. Thickness: 1.0-100.0mm
2. Width: 1000mm, 1219mm, 1500mm, 1800. And length: Could be cut
into any size as per customer's request. Usually our common sizes:
1219mm*2438mm (4*8ft), 1219mm*3048mm (4*10ft) and 1000mm*2000mm.
3. Packing: Wooden case, or customize package.
Application:
Architectural decoration, luxury doors, wall decoration plate,
elevators decorating, KTV indoor decoration, metal tank shell, ship
building, decoration inside the train, as well as outdoor works,
advertising name plate, the ceiling and cabinets, aisle panels,
screen, the tunnel project, hotels, guest houses, entertainment
place, kitchen equipment, light industrial and others.
Standard | Grade | C max | Mn max | Si max | P | S | Yield strength max | Tensile strength | Elongation% |
JISG3101 | SS400 | 0.22 | - | 0.30 | 0.045 | 0.030 | 245 | 400-500 | 26 |
GB700 | Q235B | 0.14-0.22 | 0.30-0.65 | 0.30 | 0.045 | 0.030 | 235 | 375-460 | 21-26 |
ASTM | A36 | 0.24 | - | 0.40 | 0.045 | 0.030 | 250 | 400-52 | 26 |
EN10025 | S235JR | 0.22 | 1.50 | --- | 0.045 | 0.045 | 175Mpa | 340-510 Mpa | 17 |