Add to Cart
Product Features
SV101 Water-proof Acrylic Sealant is a one-component environmental friendly sealant. It has good waterproof ability, waterproof ability and multipurpose use. It has good flexibility, adhesion and is paintable.
High and low temperature resistant performance, remain performance
2. Applicable to all types window and door of glazing, weather seal.
3. Applicable to Glass, marble, aluminum and other building waterproof seal.
BASIC USES
Suitable for all kinds of kitchen, sanitary installation and mildew
waterproof seal.
Applicable to all types window and door of glazing, weather seal.
Applicable to Glass, marble, aluminum and other building waterproof
seal.
HOW TO USE
Surface Preparation
Clean all joints removing all foreign matter and contaminants such
as oil, grease, dust, water, frost,
old sealants, surface dirt, or glazing compounds and protective
coatings.
Application Method
Mask areas adjacent to joints to ensure neat sealant lines. Apply
SV101 in a continuous operation
using dispensing guns. Before a skin forms, tool the sealant with
light pressure to spread the
sealant against the joint surfaces. Remove masking tape as soon as
the bead is tooled.
TECHNICAL SERVICES
Complete technical information and literature, adhesion testing,
and compatibility testing are
available from Siway.
SAFETY INFORMATION
SV101 is a chemical product, not edible, no implantation into body
and should be kept
away from children.
Cured silicone rubber can be handled without any risk to health.
Should uncured silicone sealant contact with eyes, rinse thoroughly
with water and seek
medical treatment if irritation persists.
Avoid prolonged exposure of skin to uncured silicone sealant.
Good ventilation is necessary for work and cure places.
DISCLAIMER
The information presented herein is offered in good faith and is
believed to be accurate. However,
because conditions and methods of using our products are beyond our
control, this information
should not be used in substitution for customerˇs tests to ensure
that our products are safe,
effective, and fully satisfactory for specific applications.