Escalator Guide Rail Steel Roll Forming Machine

Automatic Roll Forming Machine for Steel Escalator Hollow Elevator Guide Rail

Machine Features

1. This kind of roll forming machine is suitable for TK3 TK3A TK5 TK5A hollow guide rail and escalator guide rail, customers need provide their guide rails drawings.

2. When producing hollow guide rails and escalator guide rails of different specifications, worker just need change machine rollers.

3. The whole line adopts PLC control, LCD touch screen and human-machine interface. Realize the interaction between human and PLC. The operator can automatically run (programmable control) and monitor the control process through the set program, so as to realize the operator to control the production line and modify the control parameters, and monitor the equipment operation status, operation parameters and fault indication in real time. The length of the work piece can be adjusted. Real time monitoring of equipment operation status and fault indication.

4. There are two operation modes: manual and automatic. It has the function of manual and automatic switching: in the manual state, it can operate a single machine for maintenance; in the automatic state, it can operate the whole line for production and start in sequence; the whole line is equipped with an emergency stop button, which is easy to handle emergency accidents and ensure the safety of equipment and operators.

5. Manual operation panel is set beside the machine to facilitate the operation of workers.

Technical Parameters

1. Model of Hollow Guide Rail Roll Forming Machine: GD150

2. Process: Un-coiler ---- Leveling ---- Roll Forming (Cooling) ---- Straightening ---- Cutting ---- Automatic Feeding ---- Automatic Punching ---- Automatic Unloading

Equipment Technical Requirement

Main Technical Parameters of Roll Forming Machine

Main Devices Description

1. De-coiler: 1 set

1.1 Inner diameter: Φ450-600mm

1.2 Max. loading: 3T

1.3 Width of strip: 400mm

1.4 Outer diameter of the rolled material: 1800mm

2. Forming Machine (13 passes)

2.1 Frame: 525*240*120*45mm, with Tempering Treatment (Material HT200)

2.2 Pitches of each frame: 400mm. The fixed shaft of double bearings in the slider rotates. The upper and lower adjustment of the slider is manual, and a disc wheel is installed on the slider to facilitate manual adjustment.2.3 Distribution Gearbox (Welded Gearbox) Drive Gear Straight Tooth 5M, material use 20CrMoTi.

2.5 Diameter of shafts: Ф60mm. Material: 42CrMo

2.6 Main motor Power: 30KW. Adopt helical bevel gear K107 reducer

2.7 Hydraulic Cutting Device (350 Type): including a set of hydraulic station. No burrs (If a little burr appears, manual removal)

2.8 Roller-type fixed-length feeding table (10 m): 1 set

2.9 Two sets of 3-D correction heads (including correction modes)

2.10 Material of Rollers: Cr12, Hardness HRC58-60

2.11 Precision ruler device: 1 set

2.12 Linkage Operating Counter: 1 set

2.13 The feed inlet is equipped with a 5-roll leveler and a cooling device. Cooling type: spray type, cooling tank pool as for the unit base, pool production needs to facilitate the treatment of dirt

2.14 Automatic punching line: 1 pc

2.15 Output: according to 8 hours/day: 500 pcs (5m/pc)

3. Conveyor and Electrical Control

3.1 Conveyor should be made firmly and reliably.

3.2 The discharging place is provided with a discharging rack and a ball chain on it for lifting.

3.3 Longitudinal Conveyor Rack of the whole line is composed of a section. The raceway of the raceway of the raceway of the raceway of the raceway is driven by chain drive, and the pitch of the chain is 15.875mm.

3.4 The transmission speed of the whole longitudinal conveying around 12-15 m/min.

3.5 The main material of vertical (lift) conveyor is rectangular pipe (specification: 100*60*3.0) and C-section steel (specification: 150*65*3.5), with built-in transmission chain.

3.6 The main material of transverse conveyor is rectangular pipe (specification: 200*100*3.5). The conveyor chain is mainly double-row top ball chain with a pitch of 25.4 mm.

3.7 The lifting transverse shifter adopts sliding track, which is reliable, accurate and durable.

3.8 Buffer device should be used in lifting transverse shifter to avoid falling of workpiece caused by too fast jack-up or transverse movement.

4. Electrical Control

4.1 The whole line electrical control is controlled by PLC. The action instructions and signal transmission should be accurate, stable and reliable.

4.2 Motor, reducer, electrical, hardware and other high-quality national standard parts, with versatility, interchangeability, stable and reliable performance, bearing should adopt dust-proof bearings.

Jiangsu Co-effort Mechanical & Electrical Technology Co., Ltd. was founded in 2017, we mainly committed to the development and production of cold roll forming machines. Since we established, we always been based on the concept of "quality-oriented-technological innovation". From the perspective of globalization, standing at the top of the industry, seized development opportunities and market space, made every effort to build a well-known brand in the cold roll forming industry of technological innovation.

Our company can provide advanced cold roll forming machine with multi-material, multi-thickness and multi-shape, and can provide flexible system solutions for other production processes such as welding, punching and automatic packaging in cold roll forming process.

We have profiler and roughness testing machine, special testing equipment for forming machine, hardness tester and other testing equipment. At present, we have provided high-demand services with automobile, construction, furniture, warehousing and other industries as well as domestic and foreign enterprises.