M8 Threaded Inline Tension Force Sensor 3000N Tension Force Transducer 3KN

M8 Threaded Inline Tension Force Sensor 3000N Tension Force Transducer 3KN

M8 Threaded Rod End Compression And Tension Force Sensor FL34 is made of 17-4 stainless steel and CE certified. In-line force transducer FL34 offers rugged structure for industrial applications. Inline load cells are designed to be mounted inline to the load axis for both tension and compression force measurement.The force sensor FL34 can be easily mounted to existing system through M8 threaded rods located on both sides of the transducer,these metric threads can also be used to mount attachments,such as female eye bolt, bolt adapter, etc., to fit different usage requirements. Tension and Compression Force Transducer FL34 uses metal foil strain gauge technology to deliver 1.5mV/V rated output with 500N / 1KN / 2KN / 3KN / 5KN five rated capacities to choose from. Each sensor is integrated with a 3-meter-long 4-core shielded cable,the cable comes with a free end which makes it easy to assemble any types of connectors for electrical connection. Compression Tension Load Cell FL34 is normally used for press-in force measurement, cylinder push pull force measurement, auto equipment,production line, hand press machine.etc. Custom made service is available for other measuring ranges with similar structure.

Dimensions

Specifications

A load cell is a transducer that converts load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.Threaded rod end tension load cell FL34 is designed to measure both tension and compression force,outputs millivolt signal ranging -25...+25mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.The applied force can be displayed through a force indicator,force indicator FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.

M8 Threaded Inline Tension Force Sensor 3000N Tension Force Transducer 3KN

Click here to download datasheet

Located in China,Forsentek Co., Limited has provided load cells,force sensors and measuring solutions to more than 30 countries all over the world.

At Forsentek,you can find universal products like:

• Compression load cell
• Force sensor force transducer
• Button load cell
• Micro load cell
• Strain gauge load cell
• Reaction torque sensor
• Rotary torque sensor

Forsentek is also an expert in customized force measurement products like:

Load pins for overload protection.

Bolt sensor for fastening force monitoring.

With experienced engineers in load cell and force sensor application field,Forsentek knows exactly what you need after you talk to us.Being expert in strain gauge based load cell manafuacturing technology and custom-made service,we are confident in providing the most suiablt products to meet your application perfectly.

Send us an inquiry,we'll get back with solutions.