ETFE tent joint welded rod, FEP welding for ETFE tents joint welding

ETFE tent joint welded rod, FEP welding for ETFE tents joint welding

Perfect welding material for FEP products.

FEP rod is made from FEP resin and prepared by the technology of extrusion and molding. It can be machined into various sealing parts and electric components. It can be used at the temperature range of -80 through +200

Note:

For our fast response ,pleasae kindly get contact with us directly by e mail, not leave message in web.

application:

1.Petrochemical and chemical processing

2.Electrical applications

3.Semi-Conductor Industry

4.Food, Beverage and Pharmaceutical industries

5.Laboratory applications

Lining Bearing pads, seals, and electrical insulation Lining Bearing pads, seals, and electrical insulation, liner tube, insulator tubing.

It is mainly used to weld kinds of FEP products and ETFE tents jointing .

Characteristic

1. High and low temperature preservation

2. -200~200°C high temperature intensity better than F4

3. No-begriming ,and no-stagnant in tube

4. Security and insulation

5. Under 60HZ—60MHZ high and low temperature , permittivity is 2.1

6. If firing, and will still insulate

7. Voltaic are>165 seconds insulation

8. Erode preservation

9. Under high temperature, fluorin and alkali will reaction with PFA, no reaction with other acid.

10. Low water absorption<0.01%

11. No firing in air( oxygen index>95 vol.%)

Properties :

FEPwelding rod material performance:
1.Molten enhanced bonding, melt viscosity decreased, and there were no changes in performance compared with ptfe.This kind of resin can be directly processed into products using common thermoplastic molding method.
2. long-term use of FEP electrode temperature - 80-200 degrees, have excellent chemical corrosion resistance, for all chemical corrosion resistance, friction coefficient, the lowest in the plastic and good performance, the electric insulation is not affected by temperature, is regarded as "plastics king".Its resistance to chemicals and ptfe are similar, is better than partial fluorine ethylene.
3. the creep resistance and compression strength is better than teflon, high tensile strength, elongation of up to 100-300%.Good dielectric properties, resistance to radiation performance.Flame retardancy.
FEPwelding rod parameters
Core diameter: 3-10 (mm)
Welding current: 220 (A)
Working temperature: 100-200 (°C)
Type: FEP electrode
Diameter: 3-5 (mm)
Current amplitude: 100 (A)
Scope: electrical, plastic and other industries
Length: 1000000 (mm)

It is predominantly used in the constchemicalruction/fabrication of semiconductor wafer baskets, aggressive baths/wet benches & custom made inert liquid enclosures.

Specification and usage of FEP rod:

Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)

Package :

Plastic bag &carton . Customized is acceptable

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1 FEP products

Film , sheet, rod, tube, (heat shrink tube),adhesive tape,elbow etc

2.PFA Products

Film , sheet, rod, tube, (heat shrink tube), elbow etc

3.PCTFE Products

Film , sheet, rod, tube, elbow etc

4.PVDF products:

Film , sheet, rod, tube, (heat shrink tube),adhesive tape,elbow , PVDF PIEZO film and sensors etc

5.ETFE products

Film , sheet, rod, tube, (heat shrink tube)

6.Perfluorinated ion exchange membrane

N11x-VRB , N21x-Fuel cell, N31x-high fuel cell, N41x-electrolysis

7.PVDF PIEZO membrane and sensors

plastic piezo film and sensors . free size and free shape .

8.PEEK products

Film , sheet, rod, tube and other products

9.Other products

PTFE products, PVF products

Professional services need the service providers to be professional. Different from many other companies

For more, please kindly get contact with us by following E MAIL direclty