Add to Cart
Introduction:
Remote Control Infrared Extender/ Infrared Repeater is a product
which amplifies the IR signal of your appliances. By connecting
this repeater to your
appliances, you may be able to conceal your appliances such as in
your TV console or cabinet.
There are 3 main parts in this IR Extender/ IR Repeater namely
Infrared Emitter ( IR Emitter), Infrared Receiver ( IR Receiver )
& Infrared Transmitter.
The emitter is to be pasted on the IR point of your appliances
while the receiver is placed in a position of which it communicate
signal with your remote control.
The IR transmitter box process signal received from the Receiver
and generate signals out to Emitters which in turn to your Players/
Appliances.
Features:
High Sensitivity - Real time transmission without any delay with
its high sensitivity sensor.
CFL Friendly - This unit can be installed in an area with compact
fluorescent lighting and work in most lighting environments
Remote Indication light on IR Receiver - Green being power
connected while flashing red indicates the signal is being sent.
Broad bandwidth - With this feature, it is compatible with almost
all the electronics appliances in the market with its wide
frequency range
Size - Small & Solid design
Low Power - 5V DC, 30mA max
Installation:
IR RECEIVER
( Note: Plasma Displays emit IR frequencies during use and may
cause interference. It is advised to distance the IR Receiver from
any Plasma TV. Ability to control multiple appliances at various
locations up to 10m. )
Connect IR Receiver to any of the 3.5mm IR ports on the IR
Transceiver box. If 2 or more IR receivers are connected, the
distance between 2 IR Receivers should not be less than 6 m to
avoid interference. ( Only 1 IR Receiver for this item )
(Note : Maximum of 6 IR Receivers can be connected to the 3 Ports
of 3.5mm Jack ( on Transceiver ) by using 3.5mm Splitter cable 1
Male to 2 Female. Three 3.5mm Splitter cables connect to
transceiver to obtain 6 ports of 3.5mm )
Remote Control from the room is achievable if the AV cable from TVs
( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e
Sharing a Player/ Appliances to watch in different rooms ) See
Picture.
IR EMITTERS
Insert Emitter cable to any of the Emitter Input Ports on
Transceiver box. ( Optional : Maximum of 24 emitters can be
connected to the 6 Transceiver Emitter Input Ports, using 4
Emitters head per cable type ) ( 8 Emitters for this model)
Stick the emitter near to the IR Point of Player/ Appliances. Only
one emitter head is applicable on each Player/ Appliance
Operate the Remote Control faces the IR Receiver. Keep moving the
IR Emitter on Player/ Appliance to achieve best signal
transmission. Stick the Emitter to the point which produced the
best signal. See Picture.
Specification:
Receiving Frequency Range : 34 KHZ to 60KHZ
Emitting Frequency Range : 38 KHZ to 56KHZ
Receiving Distance : 8 Meter
Emitting Distance : 100-200mm
Power Consumption : 5VDC, 30mA max.
Dimension : IR Receiver 31 (L) × 17 (W) × 13 (H)mm IR Emitter 13
(L) × 8 (W) × 5.5 (H)mm
IR Transceiver Box 90 (L) × 55 (W) × 26 (H) mm
Cable Length : IR Receiver 1.5m, IR Emitter 3m, USB cable 1m
Kit includes: 1-Distribution block; 1-IR Receiver; 1-Standard power
plug; 4-Dual IR Emitters for 8 devices; 1-Manual