Allen Bradley 1485C-P1CG300 1485CP1CG300 AB 1485C P1CG300

Allen Bradley 1485C-P1CG300 1485CP1CG300 AB 1485C P1CG300

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on

theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware

revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any

Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the

data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on

SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

1771-NBTC Analog Combination Module AB
1771-NBV1 Analog Combination Module AB
1771-NBVC Analog Combination Module AB
1771-NC6 96808801 Analog Cable AB
1771-NIS Analog Input Module AB
1771-NIV Analog Input Module AB
1771-NIV1 Analog Input Module AB
1771-NIVR Analog Input Module AB
1771-NIVT Analog Input Module AB
1771-NOC Analog Output Module AB
1771-NOV Analog Output Module AB
1771-NOV A High Resolution Isolated Analog Module AB
1771-NR Analog Input Module AB
1771-NT1 Analog Input Module AB
1771-NT2 Analog Input Module AB
1771-OA Digital Output Module AB
1771-OAD AC Output Module AB
1771-OAN Digital Output Module AB
1771-OBD Digital Output Module AB

1771-OBN Digital Output Module AB
1771-OC Digital Output Module AB
1771-OD Digital Output Module AB
1771-OD16 Digital Output Module AB
1771-ODC Digital Output Module AB
1771-ODD Digital Output Module AB
1771-ODZ Digital Output Module AB
1771-OFE1 960578 Analog Output Module AB
1771-OFE2 Analog Output Module AB
1771-OFE3 Analog Output Module AB
1771-OG TTL Output Module AB
1771-OGD TTL Output Module AB
1771-OM Digital Output Module AB
1771-OMD AC Output Module AB
1771-ON Digital Output Module AB
1771-OP Digital Output Module AB
1771-OQ Digital Output Module AB
1771-OQ16 1771-OQ16 A Digital Output Module AB
1771-OR Digital Output Module AB
1771-OVN Digital Output Module AB
1771-OW Selectable Contact Module AB
1771-OW16 1771-0W16 B Digital Output Module AB
1771-OWN 1771-0W16 B Digital Output Module AB
1771-OWNA 1771-0W16 B Digital Output Module AB
1771-OX Output Module AB
1771-OYL Digital Output Module AB

ADVANTECH PCI-1710 REV.C1-01-1 PCI MULTI-FUNCTION CARD

TROPOS NETWORKS 5210 MOTHERBOARD P/N 300049-01 REV.B2

IDEC Analog Programmable Logic Controller TYPE: FC4A-J8C1

VINTAGE Digital 3.0GB 5.25 FH Single SCSI HD - DSP5300S

CYCLADES ALTERPATH P/N 107-A KVM TERMINATOR KVM ADAPTER DB15M-RJ45-8 ,KB,Mouse

KAPAREL 8SLOT COMPACTPCI BACKPLANE MODEL PS4734-5

ARIEL MM-96 SBC (SINGUE BOARD COMPUTER)

DELL (POWEREDGE) SAS SATA HARD DISK TRAY P/N#CN-0F9541

ZNYX ZX346Q Quad Port 10/100 PCI Ethernet Adapter

Allied Telesyn Centrecom AT-3024SL

FAULHABER MINIMOTOR 2444 S 024 B K903 158762

TELECT P/N 005-0005-0002 X-AISLE 56 CKT 19X 1.75 BLK

EMACS MRG-6500P-R 500 WATT POWER SUPPLY

VIA EPIA MII 1000 - motherboard - mini ITX - VIA C3 - CLE266 - 1.0 GHz (pulled)

CPU PROCESSOR INTEL PENTIUM A80502120 SY033/SSS IPP

APEX PRECISION POWER - PA92 - IC, OP-AMP, 18MHZ, 50V/μs, SIP-12

Advantech PCI-6881 REV. A2

AMD-K5 PR133ABR CPU

HP PA-RISC CPU MODULE - p/n #: A2375-80025

Actiontec External Wireless USB Adapter (802.11b)

HAMILTON GASTIGHT SYRINGE FOR PRECISION MEASURING

Asus TUV4X - 533MHz FSB Socket 370 CPU

BARNSTEAD THERMOLYNE MODEL HPA1915B USED

CHELSIO 110-1064-21 A0

The use of the product:

1.boiler Heating,

Moore Automationare still working and able to shipping worldwide

Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you.
If you have any question pls do not hesitate to contact us.We can supply all kind of the automaiton parts,if you want to purchase parts pls send the parts model to my mail, I will prompt reply you asa I receive the
Hope anyone enquire from us.

it is a leading global supplier of control system components. We specialize in control systems and drives.
With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts.

We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system,
Distributed control systems, programmable controllers, panel controller and drive!

* Our mission is to help you!
* Reduced maintenance costs!

We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help supporting your existing control systems.

We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have undergone rigorous testing and certification!