Five Station Electric Motor Testing System For Motor Life Test , Low Noise

Five Station Electric Motor Testing System For Motor Life Test , Low Noise

Name: Five-station motor life test system

Model: CMT-1040MLTS

Product introduction:

The five-station motor life test system is a special device for the durability test of the motor simulation load. The system consists of a hysteresis brake; a constant current source; a fixture; an industrial computer; a coupling; a controller; a test bench; System test software runs on Windows 7 or above environment, with features such as full-featured, reliable, easy to operate, and highly scalable. Can quickly and accurately detect the test motor current, temperature and other parameters, and can test data stored on the local disk. There are five independent channels, which can control the start and stop and load of the motor separately, and the five channels do not interfere or influence with each other.

Features

When the basic hardware is all connected, the test software sends the command to the controller via the IO card according to the test mode set by the user. After the controller receives the command, the AC contactor is turned on and off to control the start of the motor. And stop. At the same time, the test software will also control the output of the constant current source through the serial port card to load the motor and collect the current and temperature of the motor through the controller.

a). The system can simulate the start and stop work conditions of the motor during actual use, and the duration and state can be freely set and adjusted.

b). The system has five independent motor power inputs, corresponding to five output motor power supplies. The test conditions are: starting load, running load, falling load, brake load, stop and other working conditions. The running time of any state can be set, and the number of cycles can be set (up to 999.99 times)

c). The load (brake current) of the motor can be set, and the motor working time and intermittent rest time can be set arbitrarily. The working chart is as follows:

d). The motor automatically stops after the number of test cycles reaches the set value

e). When the motor is tested, the running current and temperature of the motor will be collected in real time. If the motor current/temperature exceeds the set value, the test system will stop the test and alarm and display the cause of the error on the screen.

f).5 independent current input interfaces, each station is independently controlled and operated independently, which does not affect the start, stop and save data of the motor.

Selection reference

Software introduction

Configuration

Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cost and enhance enterprise’s international competitiveness.

Kingpo is accredited by International Electrotechnical Commission(IEC) and becomes a nominated supplier and is officially issued a CBTL certificate.We are now among the world’s leading laboratory testing equipment manufacturer to produce the highest level and more standard testing equipment for global Electrotechnics labs becoming nominated supplier of NEMKO,UL,PHILIPS,CTK,CVC(Vkan Certification & Testing Co.,Ltd),Dongguan Quality Testing,China Household Electric Appliance Research Institute,Russia National Standard Institute,Belarus National Standard Institute,Korea National Standard Institute,etc.Lamp cap gauges and testing equipments produced by Kingpo,which are calibrated by CNAS and ilac-MRA ,have a high international reputation.

Kingpo aims at manufacturing world class testing equipment for Chinese labs,establishing an independent R&D center and introducing foreign state-of-the-art technology and international high-tech talents.Adopting a creative design concept,taking sensor data acquisition as forerunner,computer control technology as lead,imported transmission device with high accuracy and low noises,we have developed more than one hundred and sixty products.

Lab software Lims system　

Material combustibility testing equipment　

ELectric tool testing equipment

Plug and socket testing equipment

Switch service life testing equipment　　　

Electrical accessories testing equipment

Luminaire testing equipment　　

Household appliances testing equipment　　　

Anti water spray testing equipment

Wire and cable testing equipment

IT product testing equipment　　　　

Battery testing equipment

Kingpo’s domestic customers include Entry-Exit Inspection and Quarantine Bureau, Bureau of Technical Supervision,Product Quality Supervision and Inspection Institute,UL Lab(Underwriter Laboratories),TUV Rheinland,SGS and other electronic manufacturer.Our products are exported to international market and have also established distributorships in HK,Vietnam,Singapore,Thailand,Iran,India,

Africa,New Zealand,Australia ,Germany and so on.

Service is an essential factor to improve enterprise’s competitiveness.Therefore,Kingpo has always made every effort in improve service level and service value.Before sale,we have professional engineering team to provide customers with comprehensive consultant and customized service.After sale,we have after-sale team to offer customer timely and satisfying technical support and product maintenance.

By means of excellent product competitiveness and complete service,our company has won numerous customers high praise and sincere trust.In complying with technical improvement and increased efficiency and quality assurance of these products ,we insist on providing high end products to market and dedicating to being a leader in testing equipment industry.