Home /Electronic Accessories & Supplies /

Smart Energy Meter For AMR / AMI System , 3 Phase Electric Meter With GPRS Modem

Smart Energy Meter For AMR / AMI System , 3 Phase Electric Meter With GPRS Modem

Brand Name:Radarking
Certification:IEC62053-21; IEC62052-11; IEC62056-21
Model Number:DTZY150
Minimum Order Quantity:1
Delivery Time:35days
Payment Terms:Western Union, T/T, L/C, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Wuhan Hubei China
Address: No.270, Huangjinkou 3rd Village, Hanyang District, Wuhan City, Hubei Province, China
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Smart Energy Meter For AMR / AMI System , 3 Phase Electric Meter With GPRS Modem


Description:

Smart Electric Meter is a smart metering device with special design for nation smart grid. With independent infrared, RS485, carrier communication and IC card interface, it can support for remote or local fee control function. The meter has advantages of high accuracy, good linearity, wider range and long life, which can widely used in city, country or school and any enterprise.


Main Technical Parameters:

Applicable StandardIEC61036-2000
Accuracy ClassClass1.0, Class2.0
Operating Temperature-2560
Rated Voltage3×100V,3×57.7/100V,3×220/380V
Starting Current

Current transformer input0.2%Ibclass1.0, 0.3%Ibclass2.0

Direct input0.4%Ibclass1.0, 0.5%Ibclass2.0

Rated Current

Current transformer input3×1.5(6)A

Direct input3×5(20)A,3×10(40)A ,3×15(60)A,3×20(80)A,3×30(100)A

Voltage Loop Consumption≤1.5W (5VA)
Current Loop Consumption≤1VA

Function and characteristic:

1.Measure ford direction,reverse direction and 4 quadrants reactive power and max demand,the time of max demand occurs

2. Split phase power measuring

3. 4 rates,4 time zones,6 time period,10 day time,12 public holidays

4. Record loss voltage,loss current

5. The data can be congeal auto and record data of l2 months

6. The active forward & reverse direction and the reactive 4 quadrants output via pulse. The pulse width can be setup by controller or RS485

7. The infrared controller will display the item

9. It can be mounted the meter key stoke-display or circule-display when power is off A11 the data can be setup by controller of software

10. Recording affairs parameters function

11. Meter reading function at power off

12. Recording the load

13. It is easier of electric department centralized management

14. Alarming overload function

15. Transformer magnification can be set

16. A11 the data and information can be displayed via LCD

17. Measuring the voltage,current,power of the each meter all the time

18. It has the recording feature of loss voltage, loss current, coincidence rate of the voltage, power off, programmer, adjust the time and so on

19. It has the function of program forbid and demand replacement

20. Power break awakening function

21. Two sets of Battery, one(3.6V)is used for keeping data, and another(6V)is used for copying, they are easier to change


Diagram:


Notes:
No device inside can be adjust by user.
When installing and using, there should be tight enough for each connection line, to avoid from any bad connection which would cause heating to damage the meter. Make sure of the right connection of input and output. Please install the meter on local where is dry and ventilated. Don’t put in the place under direct highlight, especial for infrared window. When using infrared communication, it should take more attention to avoid from any disturb from highlight to infrared interface, and please adjust the distance and angel of infrared, to make sure of reliable communication.

China Smart Energy Meter For AMR / AMI System , 3 Phase Electric Meter With GPRS Modem supplier

Smart Energy Meter For AMR / AMI System , 3 Phase Electric Meter With GPRS Modem

Inquiry Cart 0