Add to Cart
XRS1050 Rotary Drilling Rig:
Features:
- Adopt the hydraulic retractable track chassis special for the
rotary drilling rig, which meets the stability and the convenience
of the transportation.
- Adopt imported Cummins engine with strong power and enough power
reserve, which can meet the highland construction. The noise and
emission meet the standard of Europe III.
- Adopt the triangle variable structure, which has strong
stability.
- The extra large mast section reduces the shake of the mast during
construction and improves the construction quality.
- Attach with the drill rod bracket, which reduces the shake of the
drill rod during construction, and ensures the drilling
verticality.
- The hydraulic system adopts the load sensing technology, which
improves the efficiency of the hydraulic system and saves the
energy.
- It can be installed with many kinds of drilling tools, realizing
both dry and wet drilling work which can be applied to the concrete
pile drilling construction of many kinds of foundations. The drill
rod adopts lock or friction drag retractable structure, and
transmits torque to the drilling tools through the claw or friction
plate, which has big transmission torque and high efficiency.
- The main winch steel wire rope adopts single winding, which is
convenient to operate, and greatly improves the service life of the
steel wire rope. There is drilling depth detection device installed
on the main winch. The single winding makes the depth detection
more accurate, and is convenient to maintain.
- Attach with transportation dismantling landing legs, which is
convenient to dismantle and transport.
- The drill unit adopts the imported reducer and motor of
international famous company, which have big drilling torque and
high work efficiency.
- Install the infrared camera to observe the service condition of
the main hoist in the cab day and night.
The Parameter of XRS1050 Rotary Drilling Rig:
Model | XRS1050 | ||
---|---|---|---|
Engine | Model | CUMMINS QSM11-C400 | |
Rated power | kW | 298 | |
Drill unit | Max. output torque | kN.m | 390 |
Rotary speed | r/min | 7 ~ 18 | |
Max. drilling diameter | mm | φ 2500 | |
Max. drilling depth | m | Standard configuration 86( friction drag × 5) | |
m | optional configuration 105( friction drag×6) | ||
m | optional configuration 70( lo c k×4) | ||
Pressurized cylinder | Max.pressure | kN | 240 |
Max. hoisting power | kN | 220 | |
Max. stroke | m | 6 | |
Main winch | Max. hoisting power | kN | 400 |
Max. hoisting speed | m/min | 60 | |
Auxiliary winch | Max. hoisting power | kN | 100 |
Max. hoisting speed | m/min | 65 | |
Mast obliquity Si d ew i se/forwards/backwards | ± 4 ° / 5 ° /15 ° | ||
Chassis | Max. travel speed | km/h | 1.2 |
Max. gradeability | 35 | ||
Min. ground clearance | mm | 445 | |
Track shoe width | mm | 800 | |
Max. track width | mm | 3500 ~ 4800 | |
Hydraulic system | Working pressure | Mpa | 32 |
Overall operating weight | t | 117 | |
Dimension | Working condition | mm | 10265 × 4800 × 27520 |
Transportation condition | mm | 17615 × 3500 × 3535 |