HOPU CYA Series centrifugal oil purifier is a centrifuge separator
which can separate solid matters from two kinds of different
density liquids on a continuous basis and also can separate two
liquids simultaneously. By reducing process cycle time and labor
requirements, these separators offer high cost efficiency in liquid
clarification and reclamation, solid-liquid separation and its
classification, recovery and thickening of solids and in other such
Apply for lubrication oil, fuel, etc. two phase, three phase
separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil
Centrifuge separator mainly apply to treat fuel, lubrication oil
and other mineral oils in marine diesel engines and diesel
generator sets in which contain water and mechanical impurities.
HOPU CYA series will result in reducing mechanical wear of the
diesel engines and other machines so as to greatly extend lifetime
CYA series can also be applied to separate two different liquids
with different proportion and being immiscible.
Full automation possible with PLC automatic control panel.
Centrifugal separation requiring no filter media.
High reliability drive train system backed by delivery of over
1,000 units a year.
Bowl design with superior separation performance and with good
response to discharge loads.
Pilot valve regulates total/partial discharge of solids.
Super partial discharger (option) minimizes liquid loss and
maximizes thickening of solid
fraction for discharge.
Vibration-proof design realizes long working life.
Full automation possible with PLC automatic control
Please contact for more technical details and latest price:
Skype ID: joanna15023
Email 1: firstname.lastname@example.org
Email 2: email@example.com
Mob: 0086 13983126457 (what's App for online inquiry)
Tel: +86 23 62538144
Fax:+ 86 23 62538144-3
Branch 1: www.oilfiltration123.com
Branch 2: www.oilpurifiertech.com
|Separated volume||Rated value||2000||1500||2000||3000||6000||1500|
|(L/H)||0# Diesel oil||2200||1600||2200||3500||6500||1600|
|30# SAE LO.||1200||800||1200||1800||3600||800|
|Oil feed pump||1.5||1.5||1.5||1.5||2.2||1.5(1.5x2)|
|Slag discharge way||Manual Discharge||Auto slge / Auto partial discharge|
|Heating way||Electricity/Steam 0.45~0.7MPa / Conduction oil 170~210℃|
|Control way||Relay||Relay / by PLC auto control|
|Interface dimension||Fuel oil inlet/||DN25/||DN25/||DN25/||DN40/||DN40/||DN25/|
|return oil outlet||DN25||DN20||DN25||DN32||DN40||DN25|
|Control water inlet||G1/2”||G1/2”||G1/2”||G1/2”||G1/2”||G1/2”|
|Alarm output cable||CEFR2x0.75 or CEFR10x0.75|
|Power supply||3φ-380V/50Hz or per your reques|