Electric Power Fittings Pole Line Hardware Hot Dip Galvanized Cross Arm Brace

Electric Power Fittings Pole Line Hardware 33KV Transmission Line Hot Dip Galvanized Cross Arm Brace

hot dip galvanzied one bolt /two bolt /three bolt suspension guy wire clamp for deadend hardware

Decscription:

• Electric Power Fittings Pole Line Hardware 33KV Transmission Line Hot Dip Galvanized Cross Arm Brace
• 1. high strength and well durable
• 2. professional manufacturer
• 3. reanable price and high quality
• 4. Competitive price link fitting
• 5. Small order accepted
• 6. Prompt delivery
• 7. Accurate CAD in drawing
• Electric Power Fittings Pole Line Hardware 33KV Transmission Line Hot Dip Galvanized Cross Arm Brace
• Straight cross arm: only considered in normal without bolt, under vertical load and horizontal load of the wire; Tension cross arm: conductor under vertical and horizontal load, the poor will also bear wire pulling force;
• Angle of cross arm, except under vertical and horizontal load of the wire will also bear big unilateral wire tension. According to the force of the cross arm, the straight rod or 15 Angle pole adopts single cross arm, under the corner at the corner of 15 degrees above rod, tension rod, terminal rod, branch rod with double cross arm.
• Cross arm general installation from the peak of 300 mm, straight cross arm should be installed in the side, branch Angle pole, pole terminal, rod cross arm should be installed in the thread side

2. advantage

1) special material for superior quality and longevity

2) phosphating surface finish for environmental protection ,rust protection and best price

3) attractive appearance

3. our company

Qingdao New Taosheng Metal Co., Ltd. is located in Qingdao City Shandong Province and very close to qingdao Port. Our company was founded in 2002, and is specialized in the production and operation of cable fittings, electrical fittings, overhead line pieces of iron and steel wire products. We are the leading R & D enterprise. Our plant covers an area of 12,000 square meters, with more than 150 employees, primarily engaged in the ADSS, OPGW cable fittings, electrical fittings, non-standard fittings, communication products, power lines iron, galvanized steel, plastic pipe design, production and cargo supply service. Our annual production capacity reaches 15,000 tons to provide users with thousands of electric communications products

DETAILS OF THE PICTURES:

Other material of transmission line fittings like angle iron, angle brace, steel angle strip are available:

Qingdao New Taosheng Metal Products Co.Ltd foundate in 1998 Year with 160 workers .located in Qingdao City,Shandong Province China ,and the close to the biggest port of Qingdao Sea port .

We are close to the Qingdao Airport 30 minutes by car .

The factory covers an area of 10,000 square meters and its architectural area is 5,000 square meters .It has over 160 staff , including 5 engineers, 15 specialized Technician.Two forging workshops,one mold workshop. Our engineer can design the drawing by CAD ,solidworks to calculating the weight of the drawing.

Our Mainly equipments are:1000T/630T/400T/300T/160T forging machine,air hammer,heating furnace,rolling machine,tapping machine,blasting machine and so on.Also Our factory have relationship with heat treatment factory,milling factory and galvanizing plant,quality can enjoying good reputation in world market.

We are professional factory and Manufacturer to make rigging hardware, electric power fittings, concrete forming hardware ,agricultural anti hail accessory ,aluminum die casting and other OEM etc, made of forging ,stamping ,machining and casting

and also we have welding machine and CNC machining workshop to do more process Main products comprise Building Concrete Products(coil rod ,coil insert ,coil tie ,coil cone ,jack ,nut ,plate,scaffolding accessory,foot anchor ,lifting anchor ) Poleline accessories, Powerline fittings( like anchor rod,ground screw anchor ,no wrench anchor rod,screw anchor ,helix anchor rod ,helix pile ), anti hail accessory (wire tensioner,anchoring clamp,wire tender,wire collar wire rope ,wire strand , anti hail net,wire anchor clamp ,wire stretcher),Rigging hardware(shackle, turnbuckle ,and wire rope clip) other OEM items.

Our main aim is to develop our factory to a international OEM company

Our Service, Your Safety” , “Customers Demand, Our Pursuit .To Provide the most suitable product and pragmatic services is our firm belief.

QUALITY, SINCERITY, EFFICIENCY and SERVICE. Sincerely wish long-term cooperation between you and us. Welcome to our factory for a visit.