Add to Cart
304 316 Easy Operate Sanitary Stainless Steel Beverage Filling Machine
1. Complete water filling machine Rinser The rotary wheel is a
fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of SUS304
stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp
is capable of cleaning any part of bottle inner wall, and also
saves rinsing water.
All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine
frame via gear transmission.
Transfer Starwheel
Made of stainless steel of superior quality.
Equipped with bottle jam protection device.
Complete water filling machine-Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS316L.
Filling valves are reasonably structured with accurate filling.
Filling flow can reach 200ml per second.
Bottles go up and down in the function of cam through elevator, to
process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed
support of bottle-neck
Complete water filling machine-Capper
Capper is the machine with highest precision, influence very much
with the stability and reliability of the filling monoblock. Our
capper features as follows:
Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop
the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of
caps.
A cap inspecting system is applied to control on-off of elevator.
Complete water filling machine--Machine Frame
The machine frame is a welded structure of high quality carbon
steel with the surface anti-rust treated and coated. The machine
frame is wrapped with stainless steel sheet (ANSI304).
Driving system of the 3-in-1 Unit is positioned under the machine
table. One main motor provides driving power via gear transmission.
The gear transmission system is an interleaved arrangement of steel
gears and nylon gears.
The output shaft of the main motor is equipped overload protection
to secure machine safety.
Electrical Control
The electrical cabinet is made of coated carbon steel. From bottle
infeed to bottle discharge, a PLC controls the fully automatic
operation of the 3-in-1 Unit.
A complete water filling machine includes:
- Water treatment
- Blow molding machine
- Unscrambler
- Air conveyor
- Rinsing-filling-capping 3-in-1 monoblock
- Sleeve / OPP labeler
- Air dryer, visual inspection, ink jet printer
- Shrink wrapper / wrap-round case packer
- Palletizer
- etc.
2. Technical Parameter :
Model (KQG) | 16-12-6 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-15 |
Washing head | 16 | 18 | 24 | 32 | 40 | 50 |
Filling head | 12 | 18 | 24 | 32 | 40 | 50 |
Capping head | 6 | 6 | 8 | 10 | 12 | 15 |
Capacity(500ml) | 4000BPH | 6000BPH | 1000BPH | 1200BPH | 16000BPH | 24000BPH |
Power | 3.8kw | 4.3kw | 6.5kw | 8.7kw | 9.5kw | 12kw |
Overall size L*W*H | 3050*2000*2400mm | 3170*2070*2400mm | 4070*2350*2400mm | 5100*2600*2400mm | 6250*3050*2400mm | 7500*3900*2400mm |