Auto Close Intelligent Access Control Barriers and Gates 80*100 Straight

Auto Close Intelligent Access Control Barriers and Gates 80*100 Straight Automatic Boom Barrier

Easy installation and maintenance reduces your labor cost

Simple structure and no limit switch design ensures easy installation and maintenance which reduces your labor cost

Heavy-duty and simple-design housing

The housing adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading in 5 years, conformed to the IP54 dustproof and waterproof, Simple design also decorates your premises

Anti-collision protects boom arm (optional)

Anti-collision mechanism will protects the boom arm not to be damaged once boom arm was collided by a vehicle.

Safety--- Anti-hit by Loop Detector (Optional)

While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.

Safety--- Anti-hit by IR photocell (Optional)

While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

Automatically close after the given time

Once this function is set “ON”, the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.

Automatically Close by loop detector (Optional)

If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered

Automatically open by loop detector (Optional)

If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered

Manually control in case of no power

Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

Warranty:

1. Drive Motor is warranted against manufacturer’s defect for lifetime
2. Standard warranty for all components is valid for12 months from the date of delivery
3. This warranty does not include damages caused by:
a. Wear and Tear
b. Theft
c. Accidents
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)

Our Service :

1. Our Factory has 8 years OEM/ODM experiences in the line of barrier gate .
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it before bulk order.
5. Online technical support makes it carefree to be our business partner.
6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.

FAQ:

1. When barrier finish closing, why does the arm open itself slowly?

· the spring is too tight, you need release the spring a little, then test it again.

· see whether the main crank touch the triangle tightly or not, if tightly, adjust it.

· reset the balance position and the electrical limit switch.

2. Why does the controller panel operate with "Di Di Di" abnormal noises?

· As for this, it means the resistance on controller board is broken, if you have professional tools to check,

· then replace that broken resistance, if not, replace that controller panel.

3. Why does the barrier finish half operation of opening and closing?

· If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.

4. When barrier closed, why is there a 5 degree angle of inclination?

· the model is not good, and the gear doesn't fit each other tightly.

· the barrier didn't adjust well, need to reset.

5. When barrier finish open, but it closes itself without any order control, what's the problem?

· To check the loop cable first, because the loop cable maybe brokem

· To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.

6. Why does the arm wave a lot when opening and closing?

· The spring is very tight

· The Screw touches the rubber absorption tightly, need to reset again.

7. Rubber linning installation suggestion:

· It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.

· The place with many vehicles come and go, like shopping center, carpark area.

8. Can you accept OEM/ODM order?

· Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.

Shenzhen Maixiang Technology Co. Ltd provides the barrier gate, tripod turnstile, pedestrian barrier series and parking industry with revenue, access and security control system expertise. With over 20 years of industry experience, we strive to supply our customers