PE Agricultural Film Plastic Washing Recycling Machine And Pelletizing Line

PE plastic agricultural film for greenhouse recycle washing pelletizing line

With the agriculture technology grow up, and our daily life increased, agricultural film and cover film are widely used in agriculture area. It can improve the agriculture development, Increasing in the variety of crops brings huge benefits. Then the fast development it brings big problem for Contaminated land and recycle film.

But we have the solution to settle this problem, we have the special technical team, it can solve the sand and water etc. problem, meanwhile can solve dewater, dry, pelletizing and high capacity problem. Especially for our film squeezing machine, STPLAS has very nature technology.

Due to the films have large sand, stone and other Impurities (about 50-60%). So it will be broken the crusher blade, Reduce the life of the blade.

So about this problem, we make a solution:

1. Adopt the hydraulic packing shearing machine, which will pack the films, and cutting as the size of 150-200mm. each pack cuts 5-7 knife.

2. Then going to belt conveyor, the belt conveyor has melt detector.

3. After belt conveyor, it has roller screen, make the films loose, the waste sand, stone can take out when on roller screen. After entering the sanding machine, through high-speed rotation, a mesh hole is provided in the barrel to discharge some small debris, silt and small metal,

4. and then enter the crusher. At this time, the material contains about 10% of sediment.

Reduced wear on crushers and Blades.

5. The material after crusher, it goes to high speed friction washer, then going to floating washer machine.

6. The film material stretch in the water, with four rollers to stay more time in the water, than the dirty material will be down on the tank , then go into low speed friction machine.

7. further cleaning, into the next level rinse tank cleaning and separation,

8. spiral feeding plastic into the extruder, the extrusion material is in a semi-plastic state, the water is about 7-8%, through the air sent to the storage room for natural evaporation water

9. After the granulation, it was fed with a side feeding and two-stage filtration, and the water ring was pelletized.

Technical parameter:

More Photos of products:

PE plastic agricultural film for greenhouse recycle washing line:

PE plastic agricultural film for greenhouse recycle pelletizing line:

Optional machine:

Film squeezing machine with cutter:

Final Products:



If you want to know more information, welcome to contact with us!

0086-13270970784

STPLAS GROUP is a creative company, focusing on the technology R&D of plastic recycling, and providing the equipment and solutions for plastic washing, recycling and granulating.
STPLAS GROUP's plastic recycling technology mainly applied in the field of waste plastic regrinding, washing and regranuling. Thanks to the R&D ability and well-understanding industries's experience, STPLAS GROUP can provide the customized plastics recycling solutions to customers.

STPLAS MACHINERY has our own R & D team , We will provide the highest quality product “QUALITY IS OUR CULTURE.” STPLAS will design as your local factory requirement, each line is special.

Warmly welcome to visit us. We trust you will choose us!

We customize totally production lines for each customer! You just need to tell us your demands.

We produce PET washing recycling machine line, PP/PE recycling washing line. Each machine line includes crushing-washing-drying process.

We also produce plastic granulating machine line. If you want to make clean plastic flakes into small particles, you can also contact us.

We also produce plastic shredder, film squeezing machine, plastic crusher, agglomerator, mixing machine, pipe fitting injection machine, plastic compounding machine etc.

Of course, if part of your machine line needs to be replaced, we can also help you replace it according to your existing production line.

OUR ADVANTAGE:

1. Specialized R&D team involved in plastics recycling industries more than 15 years;
2. Ability to provide the customized plastic recycling solutions;
3. Complete sales system covering the pre-sale, sales and after sales;
4. Professional engineers will perform debugging and technical guidance.