Add to Cart
Double Frequency Ultrasonic Blind Cleaning Machine Power Adjustable
for PCB Board.
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
Company Profile
Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a
comprehensive new high-tech enterprise whichspecialized in the
research&development, productction and sale of
household,commercial,laboratorial,industrial high-power ultrasonic
cleaner ect.Especially,we also can customize non-standard products
to meet customer
Our R&D department is make up of five sections:mechical
structure design section,electronic design section,software
developing section,graphic design section,testing section.Everyone
here are excellent engeineers who have at least 5 years' R&D
experence.They are good at introducing most advanced technologies
in the world and make some innovative improvement.
Now our products are composed of household ultrasonic
cleaner,mutifunctional aweep ultrasonic cleaner,power adjustable
ulltrasonic cleaners,smart dual-bands ultrasonic cleaner,dihital
ultrasonic cleaner,mechanical ultrasonic cleaner,industrial
ultrasonic cleaner,submersible ultrasonic transducer etc.All of our
standard products have achieverd most internation standards,such as
CE certification,ROHS certification,FCC certification etc.
Product details
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.
Specification
Model: | DK-1500PS |
Tank Size(mm): | 300*300*150 |
Overall Size(mm): | 360*330*330 |
Capacity: | 22L |
Frequency(KHz): | 28/40 |
Ultrasonic Power(W): | 0~360 |
Heating Capacity(W): | 400 |
Timing Range(min:secs): | 1~99 |
Temperature Range(℃) | 0~80 |
Water Drainage | Yes |
Instructions
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
2.Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7.Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt
you and damage the machine itself.
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.
Delivery
3 days after confirm the payment ,Including YOUSU,UPS,DHL,FedEx,Air
transportion,Sea transportation,Also you could ask your courier to
pick the goods.