Stable Monocrystalline C Grade Solar Panels 1960x992x40 Mm OEM Avaliable

MODEL

MS-325P

MS-330P

MS-335P

MS-340P

MS-345P

MS-350P

MS-355P

MS-360P

Peak Power Watts-Pmax (Wp)

325

330

335

340

345

350

355

360

Power output Tolerance-Pmax (W)

0~5

0~5

0~5

0~5

0~5

0~5

0~5

0~5

Open Circuit Voltage-Voc (V)

46.2

46.4

46.8

46.9

47.3

47.4

47.8

48.0

Maximum Power Voltage-Vmpp (V)

37.7

37.9

38.2

38.3

38.6

38.7

39.0

39.2

Maximum Power Current-Impp (A)

8.62

8.71

8.77

8.88

8.94

9.04

9.10

9.18

Short Circuit Current-Isc (A)

9.22

9.32

9.38

9.50

9.56

9.68

9.74

9.83

STC (Standard Test Environment): Irradiance 1000W/m2, Battery Temperature 25℃, Spectrum AM1.5

NOCT (Nominal Operating Temperature Condition of Cells): Irradiance 800W/m2, Ambient Temperature 20℃, Spectrum AM1.5, Wind Speed 1m/s.

Solar Cell

156.75x156.75mm Mono-crystalline

No. of cells

72pcs

Glass

3.2mm Ultra clear cobwebbing tempered glass

EVA

White

Frame

Sliver Anodized Aluminum Alloy

J-BOX

IP67 or IP68 rated

Module Dimension

1950x986x4.5mm (Frameless),1960x992x40mm

Weight

21kg

Connector

MC4

Operational Temperature

-30℃- +80℃

NOCT (Nominal Operating Cell Temperature

45±2℃

Temperature coe cient of Pmax

-0.45%/℃

Temperature Coe cient of Voc

0.37%/℃

Temperature Coe cient of Isc

0.08%/℃

Maximum System Voltage

1000VDC

Maximum Hail Testing

35mm Diameter,Velocity 27m/s

Front Snow Load

5400Mpa

Rear Wind Load

2400Mpa

Product Quality Warranty

10 Years

Linear Performance Warranty

≥25 Years

Module per box

27pcs

40' Container

648pcs

The electrical performance in this catalog not refers to one module, neither act as a commitment content of a contract. The electrical data is just for reference to di"erent models and Leadsun does not guarantee its 100% accuracy.

Based on the requirements for continuous innovation, R&D and product improvement, Leadsun reserves the right to adjust the information in this technical parameter file at any time without prior notice.

Photovoltaic power generation system (PV System) is a power generation system that converts solar energy into electrical energy, and takes advantage of photovoltaic effect. Photovoltaic power generation system is divided into independent solar photovoltaic power generation system, grid connected solar photovoltaic power generation system and distributed solar photovoltaic power generation system.

Ground power stations are usually large in scale, mostly in desert, grassland and other areas, making full use of the abundant and relatively stable solar energy resources in the desert areas to build large photovoltaic power stations, and access the high voltage transmission system to supply long distance load.

The distributed power station is mainly built on the surface of the building to solve the problem of power consumption in the near future. The power supply is on the user side, generating electricity to supply local load, which can effectively reduce the dependence on power supply and reduce line loss.

The new form of photovoltaic power generation is complementary to light and light, complementary to agriculture and light, the upper layer is used for photovoltaic power generation, and the lower layer is used for aquaculture or crop cultivation. As long as the PV modules are placed on the top of the water surface and along the fish ponds, there is no need to occupy valuable agricultural, industrial and residential land.

1. distributed rooftop PV power plant investment

For excellent industrial and commercial users, a large area of available roofs and large energy consumption can be used to reduce the amount of power generation in distributed power stations. At the same time, credit conditions are better. Morgan Sun Sheng will rent its roof for a distributed power station investment.

2. EPC Engineering Service

For owners of independent investment projects, Morgan will provide design, procurement, construction through-train services.

3. advisory services

For owners who are intending to build a distributed power station, Morgan will provide advisory services for the project, including project filing, power grid access, construction and operation and maintenance.

4. power station operation and maintenance

In order to reduce the pressure and inconvenience of individual owner maintenance, Morgan Sun Sheng will focus on providing operation and maintenance services for photovoltaic power stations in the area. The engineers with rich experience in operation and maintenance will manage multiple distributed power stations at the same time, and have high efficiency. At the same time, the owner of the building can enter the stock market, set up an independent legal person operation on the specific project, introduce the capital of different channels, supplement the debt funds such as bank loan, financing lease and so on, to solve the problem of project investment funds.