Ral Color Epoxy Polyester Powder Paint , Epoxy Powder Coat Paint For Product Finishing

Ral color epoxy polyester spray powder paint for product finishing

Product introduction:

Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

Applications of Product:

1.General introduction:

Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

2.Feature:

1).The products are non-toxic, solvent-free and non-toxic volatile substances,there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.
2). Raw material utilization is high, the highest utilization rate even more than 99%.
3). After being pre-coated handle, disposable construction, without primer,you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.
4). Dense coating adhesion, good impact strength and toughness, high coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.
5).Powder coatings storage and transport are safety and convenience.

3.Product series:

The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

4.Powder physical properties:

Proportion : 1.2-1.8 (depending on the color and gloss ) .

Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90).

Liquidity(180°C):22~35mm.

Curing conditions:200°C,10 minutes.

5.Average coverage:

8-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).

Test:

Our advantage:

♦ Our Powder finishes are available in a vast range of colors and finishes.

♦ Including metallic effect,chrome effect,wood grain,Candy Color Powder ,MDF powder

and other special effect,making them ideal for indoor decoration of steel furniture,

and outdoor metal products such as agricultural machinery, auto parts

♦ Our products have a good storage stability ,salt spray resistance,weatherability, exterior durability,

corrosion resistance,chemicals resistance, Highly Weather- and UV-Resistant,and also Good heat flow.

Hsinda——Top 1 Powder Factory in Southwest China

VISION

Beyond Your Imaginations

MISSION

Global Technology Enterprise

Team Spirit

Hsinda not only emphasis on the product quality, but also put a high view on personal quality and team spirit of all staffs. We are to“ our gratification derives from customer satisfaction" for the purpose and remain a state ofenthusiastic and optimistic. Our company not merely often organized various trainings but carried out outdoor activitiesfor improving comprehensive ability of all staffs.