Add to Cart
High Rigidity Tungsten Carbide Alloy Extra Vibration Resistance
With Groove
Product Description& application:
Tungsten carbide cold rolls is the main products of LIZHOU, main market is India, Europe, Amecia, even quote base on the tender, and cooperate with local agent. Our rolls include PR,CA,RT, RO,FO type.
Also could make it as per customer requirements.
The material of rolls blanks we used are sintered in HIP furnace, 100% virgin material.
Tungsten Carbide Roller as the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important parts in the steel bar and wire rod rolling. The rolls are primarily applied in high speed wire line, Kocks three roll mill, seamless pipe stretch reducing mill, three dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel etc.
Recommended Grade: LZ30/LR30/40/45
Grade | Density(g/cm³) | Hardness HRA | T.R.S(>=MPA) | Grain size (um) | Recommend Usage |
LZ30 | 14.03 | 87.0 | 3100 | 1.6 | For the case of large stress, it is suitalbe for drawing steel bar and tube, also suitable for the Alloy steel bolts and rivets upsetting |
LR30 | 14.00 | 83.5 | 2380 | 2.4 | Mainly used for the No.5 finishing mill |
LR40 | 13.75 | 82.5 | 2400 | 2.4 | Mainly used for the No.3-4inishing mill |
LR45 | 13.65 | 81.00 | 2250 | 2.4 | Mainly used for the No.1-2inishing mill |
Blank size with the tolerance(mm):
Dimension and Tolerance mm | |||||
D | Tolerance | d | Tolerance | H | Tolerance |
<=125 | +0.5/+1.8 | <=90 | -1.5/-0.5 | <=20 | +0.5/+1.5 |
>125~180 | +0.5/+2.5 | >90~95 | -1.5/-0.5 | >20 | +0.5/+2.0 |
>180~250 | +0.5/+2.8 | >95 | -2.0/-0.5 | --- | |
>250 | +0.8/+3.5 | ---- | --- | --- |
Finished size with the tolerance(mm):
Dimension and Tolerance mm | |||||
OD | Tolerance | ID | Tolerance | H | Tolerance |
<=125 | +0.015/+0.015 | <=90 | 0.0/+0.02 | <=20 | -0.01/+0.01 |
>125~180 | >90~95 | >20 | |||
>180~250 | >95 | --- | |||
>250 | ---- | --- |
Finished size (mm):
Radial run-out of groove | Radial run-out of periphery | End face runout | Surface parallelism | Inner hole cylindricity |
0.013 | 0.013 | 0.01 | 0.01 | 0.01 |
Avaliable Dimension:
Type | Dimension | ||
D(mm) | d(mm) | H(mm) | |
CR-270×190×30 | 270 | 90 | 30 |
CR-250×210×30 | 250 | 210 | 30 |
CR-200×90×20 | 200 | 90 | 20 |
CR-180×95×18 | 180 | 95 | 18 |
CR-180×125×25 | 180 | 125 | 25 |
CR-167×55×25 | 167 | 55 | 25 |
CR-160×90×15 | 160 | 90 | 15 |
CR-150×90×15 | 150 | 90 | 15 |
CR-150×90×20 | 150 | 90 | 20 |
CR-140×90×15 | 140 | 90 | 15 |
CR-140×90×15 | 140 | 90 | 15 |
CR-125×82×15 | 125 | 82 | 15 |
CR-125×82×20 | 125 | 82 | 20 |
Our Advantages:
1. 100% raw material tungsten carbide.
2. Sintered in HIP furnace
3. ISO9001: 2008 certificate.
4. Fully adopted in advance technology and equipment.
5. Professional manufacturer for tungsten carbide items over 20
years experience.
6. Quality Control System and strict inspection.
7. Better online service and after-sale service.
8. OEM and ODM are accepted as well.
Production Process: