Add to Cart
Aluminum / Galvalume Steel Sheet in Coil High Quality Good Price
Aluzinc, Zincalume, Cincalum, Afp, Galvalume Steel Coils
1. Description
Excellent Formability
In the production process, the hot dipping substrate for color
coated steel sheet is subjected to heat treatment by using
annealing furnace of continuous galvanizing line first, and the
processing and forming of substrate can be appropriately adjusted
to produce products for general use or for punching, deep drawing,
forming of catch and structure as user needed. Moreover, for the
resin coating of new formula used for color coated products, the
coating wax has excellent buckling, and even shows better
formability at high speed but not to strip off.
Remarkable Economic Benefits
Color coated steel sheet's durability and applicability are
attainable for users only at low installation and maintenance cost.
With longer service life, the color coated steel sheet is conducive
to reduction of expenditure in labor force, engineering, equipment
and environmental protection when comparing with traditional
coating operation.
Zinc Weigth: 30-150g, Colored type is 20-70g
Thickness:0.16-0.55, colored type is 0.12-0.8g
Hardness:75-90
Can be customized
2. Technical Data
Name | PPGI | Galvanized | Galvalume/Aluzinc |
Standard | EN10142 JIS G3302 GB/T-12754-2006 | ASTM A653 JIS G3302 SGCC/SGCH GB/T2518 European Standard | ASTM A792 JIS G3321 JISG3317 |
Grade | CGCC CGCH CGCD1-CGCD3 CGC340-CGC570 GRADE | SS GRADE33-80 SGCC SGCH SGCD1-SGCD3 SGC340-SGC570 SGCC DX51D | SS GRADE33-80 SGLCC SGLCD SGLCDD SGC400-SGLC570 SZACC SZACH SZAC340R |
Model No | (0.16mm-1.5mm) * 1250mm or under | (0.12mm-1.5mm) * 1250mm or under | (0.16mm-1.5mm) * 1250mm or under |
Type | Steel Coil Steel Sheets/plates Corrguated Steel Sheets/plates | Steel Coil Steel Sheets/plates Corrguated Steel Sheets/plates | Steel Coil Steel Sheets/plates Corrguated Steel Sheets/plates |
Technique | Hot-rolled-cold rolled -galvalume/galvanized -PPGI/PPGL | Hot-rolled-cold rolled -galvanized | Hot-rolled-cold rolled -galvalume/Aluzinc |
Surface treatment | Mini/regular/big/zero spangle, Chromate treatment. /chromate-free treatment /untreated unoiled/oiled Tension levellert skin pass anti-fingerprint /un-anti-fingerprint | Mini/regular/big/zero spangle, Chromate treatment. /chromate-free treatment /untreated unoiled/oiled Tension levellert skin pass anti-fingerprint /un-anti-fingerprint | |
Application | Structural use, roofing, commercial use, household applicance, industry, family | ||
Special Application | Wear resistant Steel, High- strength -steel plate |
Product Name | Prepainted steel coil, PPGI, PPGL,color coated steel coil |
Thickness | 0.135-1.5mm,Thickness tolerance:±0.02mm |
Width | 600mm-1250mm,Width tolerance:-0/+3mm |
Coil weight | 3-5MT |
Coil ID/OD | Coil ID:508±10mm/610±10mm ; Coil OD: 900-1200 mm |
Paint Coating | 15-25(um) |
Colors | refer to RAL numbers or customer sample,common colors are sea blue, white grey and bright red |
Surface | top coating:15-25um;back coating :5-7 um |
Gloss | The gloss can changeable by Customers' Request.we can also do some
High gloss, with some sparkling granule in it. |
Paint type | PE, PVDF, etc |
application | Widely used in roof, construction, door and windows, solar heater, cold room, kitchen utensils, household appliance, decoration,transportation and other lines. |
3. Application:
Main Application
Buildings: As exterior decorative material (roof material, wall
material) for industrial use, commercial use, residential use and
public facilities;
Buildings: As interior decorative material, inner wall material,
ceiling plate, partition and fireproof door; building accessories:
curtain board, signboard.
Household appliances: oil/gas boiler, rice box, portable gas
boiler, etc.
1) BUILDING & CONSTRUCTION
Floor decks, ceilings, verandas, rolling doors, warehouse,
partitions, sheds, gutters, wall, underground piping, sashes,
beams, fences, scaffolding, indoor decorations, ducts, ventilating
pipes, steel frames and cable trays.
2) ELECTRICAL APPLIANCES
Freezers, video recorder cases, motor cases, lighting fittings,
water heaters, washing machines, refrigerators, stoves, air
conditioners, dehumidifiers, fluorescent light housings, electrical
heaters, toasters, microwave oven enclosures and switch boxes.
3) TRANSPORTATION
Containers, under body panels, bus & truck body panels, fuel
tanks, noise screens, highway signs, air cleaners, conveyor systems
and guard rails.
4) AGRICULTURAL EQUIPMENT
Barns, drying machines, animal houses, hoppers, irrigation systems,
greenhouses, water tanks, sheds, silos, agricultural implements and
feeders.
5) FURNITURE & OTHERS
Vending machines, drums, cans, pails, sauna inner parts, chimney
pipes, entertainment machines, solar collectors, office equipment,
steel furniture, tool boxes, garages and waste bins.
6) COMPUTER'S APPLIANCES
Computer shells and communication instruments.
4. Production:
7. Our Serive
Pre-sale service:
1. 24 hour online to ensure quick response to customers inquiry or
online message.
2. Guide customers to choose the best suitable machine model.
3. Offer detailed specification and competitive prices.
Contract execution:
1. Product production will be arranged strictly according to the
contract.
2. Product photos will be sent to your for inspection during
production.
3. Update latest news after delivery and prepare customs clearance.
After-sale service:
1.12 months warranty except for wear parts.
2. Broken spare parts(except for wear parts) will be sent for free
due to the quality problems.
3. In time response to customers technical problems.
4. New products update for customers' reference.
8. FAQ
Q1. What is your terms of payment?
A:Usually,we accept T/T,irrevocable L/C at sight.For long term
business relations, we have more advantage terms for payment.
Q2. What is your terms of delivery?
A: We accept FOB,CIF,etc. You can choose the one which is the most
convenient or cost effective for you.
Q3: What is the lead time?
A:It usually takes 25 to 35 days after sample confirmation and
receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order. If the item was non
standard, we have to consider extra 10-15days for tooling/mould
made.
Q4. What is yoursample policy?
A: We are glad to send samples for your inspection.Standard samples
can be free, but the clients need to cover the freight cost.
Q5. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q6: How to confirm the quality with us before starting to produce?
2) Send us your samples, and we will make it according to your
quality.
Q7: How to solve the quality problems after sales?
A: Take photos of the problems and send to us. We will make a
satisfied solution for you within three days after we confirm the
problems.