Add to Cart
KSJ-1600 Type Flexo Printing Die Cutting Automatic Corrugated Box
Machine Computer Adjustment
LEADFEEDING PART
【1】 electric control machine from the alarm bell, continuous
ringing warning, to ensure the safety of workers.
【2】 drive shaft with friction clutch, to avoid misuse and damage to
the machine.
【3】 pneumatic interlock device.
【4】 The host motor starts the protection device. (The machine is
not locked, the host can not start running)
2 . leading edge roller type feeding system
【1】 suction auxiliary feeding paper fan 7.5KW, according to the
different bending conditions of cardboard, air volume adjustment,
To ensure smooth paper supply. Use the brush to remove the
cardboard surface
Dust, scraps of paper and other debris, improve the printing
quality.
[2] slotted with a chain control switch, control emergency stop
paper.
【3】 The paper lift and down adopt the air cylinder ,the action
quickly, effort.
[4] the use of Shandong "Komori" front edge roller feed system,
simple operation, high precision. The amount of extension can be
adjusted, raw
Strong adaptability. Speed transmission more stable, suitable for
warping, thin cardboard transmission, the effect is obvious.
【5】 side baffle, rear box position by the screw electric
adjustment; front baffle upper and lower gap position manually
synchronized adjustment.
【6】 skip feeding device (according to the need to choose continued
or sheet feeding).
【7】 PLC control, man-machine interface, menu storage, printing
plate correction, printing speed, quantity, time and the Department
operation
3 Feed roller
【1】 up roller use the soft rubber shaft ,so when feed the board
ensure the not borken the board Diameter 132mm, wearing rubber
shaft , make the blance correct ,keep the paper feed steay and
accurate.
【2】 The lower feed roller with embossing roller diameter ¢ 155 mm,
seamless steel pipe, embossed hard chrome plating.
【3】 feeding roller cross slider-type dial dial manually adjust the
adjustment range of 0 ~ 12 mm. Adjustment does not affect the gear
gap, to ensure transmission accuracy.
【4】 hand-type quick clearance fine-tuning self-locking device.
4 automatic zero device
【1】 The paper feed section, the printing section, and the slotted
part are automatically reset to zero.
[2] General carton use automatic zero device, try to print two can
be adjusted to the correct position to reduce cardboard waste.
Name of parameter | KSJ-900 | KSJ-1200 | KSJ-1400 | |
Color Group | Everything can be quipped according to users’ needs | |||
Printing Paper | A,B,C,A/B,B/C and A/B/C Corrugated Cardboard(Maximum gap 11mm) | |||
Production Speed | 180 Pieces/min | 170 Pieces/min | 160 Pieces/min | |
Economic Speed | 170 Pieces/min | 160 Pieces/min | 150 Pieces/min | |
Max.Paper Sizes | 900x1800/2000 2200/2400/2600mm | 1200x1800/2000 2200/2400/2600mm | 1400x1800/2000 2200/2400/2600mm | |
Min.Paper Sizes Positive knife Negative knife | 300x640mm 300x720mm | 350x720mm 350x740mm | 400x720mm 400x740mm | |
Max.Printing Sizes | 900x1600/1800 2000/2200/2400mm | 1200x1600/1800 2000/2200/2400mm | 1400x1600/1800 2000/2200/2400mm | |
Max.Die-cutting Size | 900x1700/1900 2100/2300/2500mm | 1200x1700/1900 2100/2300/2500mm | 1400x1700/1900 2100/2300/2500mm | |
Standard Printing Plate Thickness | 7.2mm | |||
Slot Width x Max.depth | 7mmx220mm 7mmx300mm 7mmx350mm (Number of blade and slot depth may be added) | |||
Min.Slot Space Positive knife Negative knife | 150*150*150*150mm 250*90*250*90mm | 170*170*170*170mm 260*90*260*90mm | 170*170*170*170mm 260*90*260*90mm | |
Printing Roller Dia | 300mm | 408mm | 480mm |