Stable PVC Strong Sheet Flooring Adhesive With High Coverage Rate / Vinyl Floor Adhesive

Efficient water-based adhesive for PVC paste the vast majority of good texture and bulk CV absorbent subfloor on the floor.

Construction Method:

Without dilution, such as the surface of the open barrel found a small amount of clear liquid, stir and then need to glue construction. And then use the appropriate blade (A2) the glue evenly coated on the substrate, wait about 10 minutes on the floor tiling mortar. After affixed with pressure roller compaction or drum roll, in order to achieve a uniform paste effect. Paving blocks wood floors should be flat to avoid stretching. M735 application meets Chinese building materials industry standard JC/T550-2008 basic environmental conditions and construction methods.

Applicable Subfloor:

①A suitable porous absorbent, strong, dry, smooth, no cracks, no grease, no wax floor.

②For the hard cement-based self-leveling screed.

③For aerial wood flooring, plywood or particleboard cushion.

Feature:

High tack, strong sticky end After curing extrusion impact resistant furniture Steering Wheel

Amount of economic environmentally friendly

Primary Treatment:

Subfloor if oil, water and mold release wax , wax water decontamination required treatment ; minor sand from the ground suggested M318 water-based primer (porous absorbent subfloor ) bottoming closed; does not smooth ground recommend the use of flat subfloor self-leveling for leveling ( leveling thickness of at least 2mm); wet subfloor moisture treatment recommended by two component epoxy moisture primer. The presence of cracks is recommended to use two-component epoxy material subfloor repair.

Note:

If the temperature is below 15 ℃ construction or relative humidity greater than 75%, please consult our technical staff opinion. If the surface of the conjunctiva after opening mortar, you must first remove, stir before use. Do not glue dumped into sewers or drains. Unused glue should be sealed. Tools can be cleaned with water.

Packaging and Storage:

25kg plastic pails. The product should be stored at room 5℃-35℃, prevent freezing, exposure. Shelf life of 12 months.

Technical Parameters:

IPAUL are fully committed to develop, produce, sell and install PVC resilient flooring (PVC Floor/ Vinyl Resilient Floor/Homogeneous PVC Floor, LVT/LVS/SPC/WPC). We provide excellent flooring products and service for our customer.