1000ml Automatic Commercial Foam Soap Dispenser, Touchfree Bathroom
Foam Sanitizer Dispenser
DoctorClean® has developed and produced high-quality hand sanitizer
dispenser system, focus on continually manufacturing the most
innovative, reliable, and long lasting dispensing products in the
hygiene market. With chemical friendly recyclable bottle &
disposable bag, all liquid (including foam soap, hand sanitizer and
alcohol gel) can be dosed by our dispensers, which are demand for
many hygiene required public places, such as hospital, healthcare,
school, office, hotel, etc.
|Model no.:||DT 800F|
|Capacity:||800 ml-1000 ml|
|Sensor distance:||6-12 cm|
|Unit size:||13.5 * 12.0 * 26.5 cm|
|Unit weight:||0.85 kg|
|Power:||4 pcs “C” batteries or AC 110 v ~ 220 v|
|Battery life:||At least 100,000 Dispensing Cycles(DC)|
1. Smart intelligent electronics skill being adopted ensure sits
high performance. No contact, to effectively prevent
cross-infection of bacteria, prevent human damage & waste.
2. Because of advanced pump fit to all kinds of liquid can be
applicable, like shampoo, liquid soap, sanitizer, etc.
3. Power consumption is very low, battery life reaches more than
4. Flashing LED indicates low battery.
5. There is a device for protect from stealing off.
6. Primary application: school, commercial center, health care,
institutions, hospitals, office, hotel, food factory & etc.
Sealed dispensing systems are “closed” and are refilled by
inserting a sealed soap cartridge into the dispenser, minimizing
the risk of bacterial contamination. This method eliminates contact
between the product and the environment before the product is used
to wash hands, rducing the risk of contamination.
Ningbo Changqi, a professional manufacturer & exporter specialized in hand
hygiene system, hand wash and skin care for medical and cleaning
more than 20 years in Ningbo, China. We have many years of sales
experience in the foreign market. 120 workers, 30000 ㎡ factory
space. ISO 9001: 2008 certificate, 40 minutes to reach the port of
Ningbo, this is how we maintain good quality and competitive prices
for valuable global customers.
Do not install in areas or direct sunlight, make sure there are not
white surface or any other strong reflectors within 30cm below.
Mount the dispenser to the wall by using the enclosed screws and
wall plugs. Make sure the wall surface is cleaned and in good
condition to ensure proper mating of the dispenser to the wall.
Install six (6) Alkaline “C”
Cell batteries, 1.5V into the battery chamber which is located on
the back of control box, replace the control box by sliding down.
Must be flush to bottom.
Refillable bottle: To fill dispenser, remove the lid and fill with
liquid or gel.
Disposable bag: To fill dispenser, fill with liquid or gel through
the hole which is on the bag, then insert nozzle. Please fill the
nozzle completely with liquid or gel (Press the nozzle & make
air discharged) before installing the new bag in the dispenser to
work, the drop or spray function could be more efficiency.
Open front of box to install liquid bag. Pull the valve hose out
and down, place the liquid bag in box on top of the control box,
place the hose in the channel, make sure the upper collar is
beneath the upper notch and the lower collar fits into the lower
Dispenses liquid or gel of viscosities ranging from 1,000-5,000
cps. To activate the dispenser, place hand under spout for
approximately one second. Sensing range comes at factory setting of
4-8cm. The sensing range set by the factory is recommended for
optimal performance. Window indicates when fill is required. The
locked, hinged housing opens for re-filling only with the special
key provided. Requires six (6) Alkaline “C” Cell batteries, 1.5V
(not included). Green indicator light signals “IN USE”. Flashing
red light signals “LOW BATTERY”. CE certified.
Q1.: Can you produce the hand sanitizer dispenser as per our
A1.: Yes, both OEM & ODM service are available.
Q2.: Can the soap dispenser be printed with our logo?
A2.: yes, for sure, just send us the design & advise the
Q3.: Can you send me the sample to see the product quality?
A3.: Yes, of course.
Q4.: Are you a cleaning products manufacturer or trade company?
A4.: We are manufacturer, and have specialized in hand hygiene
more than 20 years.
Q5.: Can I place a trial order if the quantity is less than MOQ?
A5.: For the first trial order, yes, we can make an exception for
there's any assistance needed on the marketing, pls do feel free to
us at any