Automatic Powder Coating Machine High Frequency Heater For DC Motor Armature

powder coating machine is to do on line coating, cleaning, curing, cooling for the DC motor armature with even and fast insulation coating.

1. Production process

1.1 Manually assembly the armature to fixtures and place onto the screw rod

1.2 Auto electrostatic powder coating

1.3 Auto cleaning the fixtures and armature

1.4 High frequency curing

1.5 Auto strong air cooling

1.6 Manually take the armature from the screw rod and disassembly the fixtures from armature.

Also it can includes the de-oiling step and fixture return conveyor etc.

2. Machines configuration

Machine body size: 5500X810X1450MM(L*W*H)

Loading zone 1000mm (with dust-proof cover of length 250mm) coating zone 900mm,

cleaning zone 900mm, curing zone 1200mm,

unloading zone 1500mm (Note:above size will have some changes in the production according to the situation)

2.1 Electrostatic hi-pot generator (own its internal electricity)voltage is adjustable within0-60KW, its control and display in the panel. Feature: little loss Hi-pot cable, stable output of hi-pot electrastactic, high absortion of electrostatic, fast and high rate coating.

2.2 Armature transmission Inverter motor (ZBG),Inverter(ADLEE)stepless adjustable speed, Transmission screw rod is made of epoxy rod, it is of OD40mm, Its driving supporter is TFE sleeve. Fixtures transmission stretcher is made of non-stainless steel square pipe.

2.3 Powder coating Fluidizing box can be fast disassembly for cleaning. By specialized design of auto feeding device, it can do powder feeding without stop and maintain the powder level in the coating box same, so that ensure even coating and coherent thickness.

2.4 Powder recyling system 2 classes powder recyling device can ensure no dust spraying over in the air. 1st class is tornado separator tower, underneath is automatic powder feeding device, which ensures most recyling powder be back to coating area while the machine is working. 2nd class is pulse anti-blow cleaner, which blows off the powder from the filters to reduce the labor cost. Its recyling airflow is 2500m3 /hour, motor used is 2.2KW, the speed is upto 2900rpm. It is equipped with 4 pieces filters and pulse cleaner. And also muffler device is installed at the mouth of the blower to reduce the noise.

2.5 Powder cleaning device 2 times powder shaving to clean the round diameter of the armature stack 2 times powder blowing to clean the fixture, whose air is compressed air, its power energy is compressed air

2.6 Powder curing One set electronic tube high frequency heating device of 25KW power to do the curing for the coating armature. And water cooler set-up do the cooling for the high frequency heating device, which includes he water pump and pipes.

2.7 Cooling and unloading zone 2 pieces cross flow blower to cool down the curing armature, until the fixtures cooling down for disassembly for next cycle production.

2.8 Machine frame, working bench, doors The frame is welded of 6# channel steel and profile steel, The working bench is made of insulation board of 8mmthickness, The doors and sealing board is made of powder coating cold metal sheet of 1.2mm thickness.

2.9 Dust-proof cover Size: 3000x650x650mm(L*W*H) Frame is aluminum alloy 30*30 Maintenance door, all sealing board, doors are made of organic glass

3. Machine technical parameter:

3.1 Processing armature: Max OD:45mm, stack height: 40mm

3.2 Cycle time: not less than 800pcs/hour

3.3 Post-curing mode: after on-line curing, place into the another machine-oven (if fast-curing powder used, not require post-curing)

3.4 Coating thickness adjustable within 0.1-0.5mm

4. Energy

4.1 Electricity: 30KW, 380V, 50Hz

4.2 Compressed air: 3m3/min, 0.6MPa(Need frozen purifization treatment)

4.3 Tap water

A professional supplier of motor machines with motor components, MCB machines, induction cooker coils machines and induction cooker named Ningbo Hi-tech WEDE Motor Machines Co.,ltd makes fully preparation to open our arms to welcome your specific inquiries.

Joining hands with 6 factories, WEDE give customers one stop turnkey packaging service.

They are locating at,

Factory 1:50 west JinAiFeng technology zone FuHua Road, Suzhou (DongGuan,WenZhou)

Factory 2:No.165 ShengXin Road, BaChe development zone,Suzhou

Factory 3:No.74 QingSong Road,Zhenlu town,WuJin district,Changzhou

Factory 4:No.66 XiaoWang village, QinXinCun,YaoGuan town,WuJin district,Changzhou

Factory 5:YuLong Bridge SanMen,Taizhou (Yongkang)

Factory 6:150 southwest cross of WuFangShaDaDaoZhong and Xi,NanHai District,FoShan(Huzhou)

Covering products are

Motor Machines:

rotor casting machine, rotor runner press, turning machine, shaft press, end flowers press, commutator press, paper inserting machine, armature winding machine, stator winding machines, coils inserting machine with wedge insertion, wedge inserting machine, coils forming machine, lacing machine, armature welding machine, balancing machine, testing machine, varnish machine, sleeve cutting machine, terminal press

Motor Components:

Ferrite core, magnet, commutator, shaft, bearing, stack core

MCB machines:

MCB coils winding machine, MCB coils forming machine, MCB holder terminal assembly machine, MCB printing machine

Induction cooker coils machines:

wires strands binding machine, coils winding machine, gluing machine, ferrite core inserting machine, heating press

Induction cooker:

Commercial application induction cooker, steamer, noodles cooker

WEDE team promise to give you fully heart service to obtain long term multi-parties wins cooperation. Welcome you join in us for this target too.