Dpack corrugator WJ150-1800 5 Ply Corrugated Cardboard Production Line with A、C、B、E、F Flute corrugation plant

Production line machine Specification:

【RS-1500H Hydraulic Shaft less Mill Roll Stand】

Technical Parameter:

*Stand move mode: Full hydraulic action

*Working width: Max 1800mm Min 900mm

* Paper diameter: Max￠1500mm Min￠350mm

*Single Load: Max 3000kg

*Stand main bearing diameter: ￠210mm

*Air working pressure(MPa):0.6～0.9MPa

*Total power:4.0kw

*Working power:Pressure380V Frequency50Hz

*Dimension:4450×1600×1650(L×W×H)

Hydraulic system parameter

*Working pressure(MPa): 12～16 MPa

*Hydraulic pump working span(swing): ￠100mm×460mm

*Hydraulic pump diameter (clamption): ￠63mm×770mm

*Hydraulic station motor power:4.0kw Continuous work

*Hydraulic station electro magnetism working pressure:220V 50Hz

Characteristic

*Symmetry structure could install two bundles real paper at the same time, and change the paper without any stop.

*Adopt hydraulic drive that could make the real paper lift-lower, clamp and release and move.

*Adopt pneumatic strain to adJiust the real paper.

*Expanding clips design.

*Tension control by pneumatic brake system, manual controlled and also can be controlled by splicer.

Raw materials and bought in parts:

*Stand main bearing adopt:High quality thick-walled seamless steel pipe. Origin: Chengdu

*Two side wall plates and arms adopt: Q235G/HT250 casting Origin: Hebei

*Main beam like channel steel: 280mm Origin: An steel

*Bearing:made in Ha, Wa , Luo .

*Electrical device: Adopt ABB,Schneider brand

*Pneumatic component: Zaozhuang Origin: Taiwan, Shandong

*Hydraulic: Tianyuan Origin: Zaozhuang, Shandong

【Railing for Reels】

Technical parameter

*The application of line width :1800mm

*Dimension:8000mm×300mm×170mm(length x width x height)

*pulley size :700mm*300mm*220m(length x width x height)

Characteristic

*Push the real paper to the right position, handiness and agility.

*Track buried and main frame welded by 16 channel steel, sturdy and durable

*The steel plates above the scene welded after the installation.

*Match two dollies to install the paper from two sides.

Raw materials and bought in parts

*The track and dolly materials:Tang steel, Ji Steel production profiles

【SH-900DPre-heater】

Technical Parameter

*Working width:1800mm

*Pre-heater Roll Diameter:￠900mm *Angle adjustment range:60~270 degree

*Steam temperature:150～200℃ *Steam consumption:0.25t/h

*Steam pressure:0.8～1.3MPa

*Working power:Electricity pressure380V Frequency50Hz

*Total power:0.55kw

*Dimension:3200mm×1300mm×1200mm(L×W×H)

Characteristic

*The surface of the rolls are polished and plated with chrome.

*Electro motion adjust of the dimension of per-heater, and the range of adjustment:60-220 degree

*Per-heater rolls professional manufactured, consistent with national safety standards for pressure vessels.

* Pre-heater roller and paper guide roll are plated.

* Electro motion adjust of the dimension of per-heater,suit for different paper and speed.

Raw materials and bought in parts

*Both sides of panel material:Q235G Origin:Hebei

*Guide paper roller material: 20 # steel Origin:Bao steel

*Pre-heater roll material: 20Gsteel,Wall thickness 20mm Origin:Ji steel

*Main bearings:Made in Ha, Wa, Luo . with seat bearing made in Jinrun, Zhejiang

*Steam rotary tie-in, Metal hose:made in Yuquan, Quanzhou

*Adjust motor: 0.55kw Decelerate rate1:100 made in Zhejiang short-term work

*Electricity device:Adopt ABB,Schneider brand

【SF-320S Single Facer】

A . Parameter :

Machine width: max 1800mm, min: 900mm

Max speed: 150m/min

Working pressure: 0.6-0.9Mpa, steam work pressure: 0.8-1.3Mpa

Steam consumption: 0.65-1t/h Temperature requirements: 160-200℃

Machine power: 34.45kw Working power: 380V, 50Hz

Dimension: 3800mm*2400mm*2300mm

【BS－T bridge】

Technical Parameter

*Working width:1800mm

*Max speed:150m/min

*Dimension:35900mm×3930mm×4300mm

*Guiding paper roller: Upper, front ￠135mm Upper, behind ￠135mm

*Slow transmitting paper roller: active roller￠135mm passive roller￠135mm

tension roller￠85mm hang roller￠100mm

absorption transmitting paper roller:￠100mm

*Electricity: 380V 50 Hz Total Powers: 18.2kw

【MH-900 Triplex Pre-heater】

Technical Parameter

*Working width:1800mm

*Pre-heater Roll Diameter:￠900mm

*Angle adjustment range:60~220 degree

*Steam temperature:150～200℃

*Steam consumption:0.35～0.45t/h

*Steam pressure:0.8～1.3MPa

*Total power:1.65kw

* Electricity pressure:Electricity pressure380V Frequency50Hz

*Dimension:3200mm×1300mm×3600mm(L×W×H)

Characteristic

* Each roller surface is well whetted and chrome plated sooth and durable.

* Electro motion adjust the dimension of pre-heater, the range of adjustment: 60-220 °

*The pre-heating roller is made according to national container safety standard

*Pre-heating roller and guiding paper roller are eclectically galvanized

* Electro motion adjust the dimension of pre-heater, suitable with different grades of paper and machinery speed

Raw materials and bought in parts

*Both sides of panel material:Q235G Origin:Hebei

*Guide paper roller material: 20 # steel Origin:Bao steel

*Pre-heating roller: 20G steel wall thickness: 20mm Origin: Ji Steel

*Main bearings: Wa, Ha, Luo

*Steam rotary tie-in: Yuquan, Quanzhou

*Metal soft pipe: Yuquan, Quanzhou

*Water valves: Shanghai

*Adjustment engine:speed reducing ratio: 1:100 short time working, Origin Zhejiang

*Electrical appliances: Adopt ABB,Schneider brand

【GA-318D Gluing Machine】

Technical Parameter:

* maximum paper width: 1800mm

* the highest production speed: 200m/min

* paste wheel diameter: 318 - 2

Steel tube products, embossing a surface hard chrome.

* scrape paste wheel diameter: - 160---2

Steel (S45C) products, cylindrical grinding, hard chrome polishing process.

* preheat wheel diameter: - 400 (upper) - single face corrugated paperwith (2) - 500 (lower) - paper with (1)

Steel tube products, and each wheel of compressive capacity through the national pressure vessel pressure test, accompanied by a certificate.

* press wheel diameter: 130 - 2

Carbon steel for making grinding hard chrome polishing process.

* the paper guide wheel: - 110 - 4

Is made of steel pipe and outer circle the car light hard chrome polishing.

* pneumatic cylinder specifications: (pressure wheel up and down with)

- 63*ST125 -----4

The main drive motor: 5HP*4P*1/5 ----2, upper and lower single drive.

Structural characteristics

Taiwan imported deceleration motor, control the speed drive configuration a to and hot plate in a brief shutdown synchronization,when the main motor speed to make the paste does not dry on gluing wheel surface.

* paste thickness by electric digital display control, with the city states of Taiwan gear reducer motor GH1/4HP*4P*1/1800. (plus decoderOEW2#X2)

* pressure wheel or use electric adjustment, with the city states of Taiwan gear reducer motor GH1/4HP*4P*1/1800.

【DF-745 Double facer system (including driving unit)】

Technical Parameter:

Working width:1800mm

Max. machinery speed:150m/min Temperature required:160～200℃ Steam pressure:1.25MPa

Steam consumption:1.0～1.2t/h Compressed air pressure:0.6～0.9MPa

Heating plate length:9840mm(600mm×16) cooling section length:4000mm

Total power:55kw

Electricity: 380V 50Hz

Dimension: 15180mm×2600mm×1950 mm (Lx W x H)

【SS -200N Computerized Slitter Scorer (0 press line )】

Technical Parameter:

Dongguang Packing Machinery Co.,Ltd is a company which transacts the comprehensive business ranging from machines' manufacture to export. Our main products are Double layers, Three layers, Five layers, Seven layers Corrugated Cardboard Production Line. Having experience of 30 years, we have exported our products to many countries in Europe, Africa, Middle East and South-east Asia. And the high quality of the products and our good service have won us good reputation among our customers, thus establing a long term business relationship with them.

In order to develop our business, and enhance our competitive strength, our company hopes to associate with our other companies and factories to creat a good future of the World Pachaging Market. Moreover, we're trying to supply a comprehensive after-sale service for our customers to attract more cooperators.

And we're highly appreciated by your kindly support! We're looking forward to beginning our effective cooperation in the near future.