8mm Micro slider Linear Stepping Motor Screw motor with Bracket
VSM0806 is a precision micro step motor, the output shaft with a pitch of
0.4mm of the screw, through the screw and the screw rod supporting
the turn of the screw into a thrust.
Motor basic step angle is 18 degrees, the motor running 20 steps
every week, so the resolution of displacement can reach 0.02mm, to
achieve the purpose of precision control.
Actuator aspects using subdivision drive way to meet.
Because of its small size, high precision, easy to control and
other excellent characteristics, so this micro stepper motor is
widely used in the camera, optical instruments, lenses, precision
medical devices, automatic door locks and other fields.
The motor input part of the FPC, but can according to the customer
demand can be changed to a connecting line needle, PCB and other
The mounting bracket can be changed according to the customer's
- Intelligent Security Products
|PRODUCT NAME||8MM MICRO STEPPING MOTOR LENS|
|COIL RESISTANCE||20 Ω±10%|
|MAX. STARTING FREQUENCY||800 PPS min. (AT 3.3 V DC)|
|MAX. SLEWING FREQUENCY||2000 PPS min. (AT 3.3 V DC)|
|PULL IN TORQUE||1.5 gf-cm min.(AT 500 PPS , 3.3V DC)|
|PULL OUT TORQUE||2.0 gf-cm min.(AT 500 PPS , 3.3V DC)|
|INSULATION CLASS||CLASS E FOR COILS|
|INSULATION STRENGTH||100 V AC FOR ONE SECOND|
|INSULATION RESISTENCE||1.0 MΩ (DC 100 V)|
|OPERATING TEMPERATURE RANGE||-10 ~+60 ℃|
|ENVIRONMENTAL CONDITIONS USEING SCREW GREASE||-40 ~+90 ℃|
|OEM & ODM SERVICE|
Torque Curve For Reference
Product Detail Presentation
Type of Wire Connect
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.