Add to Cart
Mineral Tools Wireline Drilling Core Barrel High Raw Materials
DCDMA Standar
Wireline core barrels eliminate the major time consuming operation
of using standard double tube core barrels – pulling, stacking and
lowering drill rods each time the core barrel is full.
Their advantages are higher penetration,higher core recovery
ratio.Longer bit life and lower labor intensity,and the advantages
get more clear with the increasing of hole depth.
Wire line core barrels are used for deep holes, mostly because they
do not need couple and uncouple the rod string each time the core
is retrieved. An overshot assembly is dropped on a cable and
directly connect to the inner tube assembly, allowing fast
retrieval of the core after each operation.
All head assemblies incorporate a shut off valve assembly which
provides a fluid pressure signal to the drill operator when the
valve members are compressed, indicating a full or blocked inner
tube.
The head assembly has latching and pivoting spear point mechanisms
which allow insertion and retrieval of the inner tube assembly, a
bearing assembly to allow the inner tube to remain stationary and
avoid sample damage while drilling, fluid pressure operating
indications and fluid control valves.
Available for each size of overshot assembly,this is the retrieval
device lowered on the wireline to recover the inner tube assembly
containing core.
At present, we have four kinds of Q series overshot assembly: BQ,
NQ, HQ and PQ.
Wireline double core barrel consists of:
1. Head Assembly
2. Inner Tube: 1.5m or 3.0m
3. Stop Ring
4. Core Lifter
5. Core Lifter Case
6. Locking Coupling
7. Adapter Coupling
8. Landing Ring
9. Outer Tube: 1.5m or 3.0m
10. Inner Tube Stabilizer
11. Thread Protector
Q Series Wireline Double Tube Core Barrels | |||
Size | Hole(mm) | Core(mm) | Head Thread |
BQ | 59.3 | 36.2 | BQ rod box |
NQ | 75.2 | 47.6 | NQ rod box |
HQ | 95.6 | 63.5 | HQ rod box |
PQ | 122 | 85 | PQ rod box |
Q Series Wireline Triple Tube Core Barrels | |||
Size | Hole(mm) | Core(mm) | Head Thread |
NQ3 | 75.2 | 45 | NQ rod box |
HQ3 | 95.6 | 61 | HQ rod box |
PQ3 | 122 | 83 | PQ rod box |
It has some advantages such as high penetration rate, high core
recovery ratio, long bit life and lower labor intensity.The
advantages can get more clear with the increasing of drill hole
depth.
Wire-line core drilling equipment is very commonly used for mineral
exploration for deep holes.