700X Flanged Hydraulic Pump Control Valve PN 25 Bar For High Buildings

Hydraulic Pump Control Valve, Cast Iron , PN 25 Bar, Flange Ends, 700X

PRODUCT INTRODUCTION

1. Description

The 700X pump control valves is a kind of check valves intended for installation at outlets of pumps in high-rise buildings and other water supply systems to prevent reverse flow of the medium. When the pump is about to stop water supply, the valves first shuts off slowly by about 90% so as to avoid water hammer caused by the sudden shutdown of the pump. When the pump comes to a complete stop, the valves then shuts off completely so as to prevent the reverse flow of water pumped out. This can effectively protect the pump and avoid the reverse rotation caused by the impact of reverse flow. This product is an indispensable protective device at outlets of pumps.It has a streamlined design, can realize precise turning on/off through guidance and is controlled by the solenoid valves. Furthermore, our pump control valves is safe, reliable, effectively avoids water hammer, boasts a long service life and is easy to install and maintain.

Pressure Rating: PN10. PN16. PN25/Class150

Size Range: DN20mm-DN800mm (3/4" - 32")

Test and inspection: GB/T 13927 API598

2. Application

The valves eliminates damaging water surges (hammer) caused when pump starts up and shuts off. The electrically activated valves gradually opens when pump starts up, and slowly closes before the pump is switched off. The valves also operates as a slow control check valves, preventing reverse flow and water hammer when power failure.

3. Performance

4. Hydraulic Control Valve Outsize Drawing

If you require other sizes and valve design standards, please send email to angela@tjfmcn.com to get the drawing.

Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.

You will get an effective response within 24 hours from TongJiang Team.

CONTACT INFORMATION

Miss Angela

Mobile: +86 13588429004(Whatsapp)

Skype: angelazhuo1

E-mail: angela@tjfmcn.com

Tel No: +86 571 86991717

Official Website: www.zjtjvalve.com

TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina.

In 2012, the company costed more than 5,000,000 USD to build 20000 M2 modern equipment factory in DEQING, HUZHOU, ZHENGJIANG. Company annual sales is more than 500 hundred million USD. Also factory has more than 100 employees, including more than 10 professional and technical personnel.

TongJiang sells the valve and pipe fitting for European, Asia, Middle East, American countries.

TongJiang introduces a full set leading of production equipment, which is from raw materials to processing plant, including the valve forming, groove, product testing and factory sales. All the production process adopts information automation control.

TongJiang Company also strictly concatenates on the quality control. The product is passed the ISO9001 quality system standard certification and national standards.