ZYDH Type Centrifugal Oil Water Separator For Vegetable And Animal Oil

ZYDH Type Centrifugal Oil Water Separator For Vegetable And Animal Oil

Introduction:

Separator has many advantages, such as separation factor high, running balance, simple operation, low oil consumption. In order to meet different requirements of production scale, the machine adopt bottom washing. Facilitate liquid seal and exclusive soap, the heart pump discharge the material, reducing system operating pressure. Regulate different specific gravity ring, can be suitable for all kinds of oil, so that better separation.

Techincal Parameters:

Feature:

1. Automatic discharge mode, include partly discharge and fully discharge.

2. Applied Labyrinth seal mode, centripetal pump discharge light liquid, with a big outlet pressure, separated light liquid can be directly transported.

3. Centripetal pump system with stable output pressure, large adjustment range, easy operation.

4. Power transmission applied frequency conversion start, running smoothly, no noise and odor pollution.

5. This series disc centrifuge specially designed with safety protection device of automatic control cabinet, all parameters can be adjusted directly r on the touch screen, so that the separation of discharge achieve the best effect.

6. With electric motor protection device (including automatic start-up and normal operation).

7. Small piston with double piston structure, large amount of discharge and more stable, low power consumption, more energy saving.

8. Light or heavy liquid phase outlet could be adjusted by online pressure regulating structure, clarity of light or heavy phase can be adjusted according to end user request.

9. Panel control clear and intuitive, simple and easy operation

Main parts:

Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor

(1). Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.

(2) The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 316L

(3) The Stainless steel cover use SUS304

(4) The base use casting steel, coating does the same way as ship bottom.

Photos