Outdoor Telecommunication Telecom Power Cabinet IP55 Outdoor Electrical Network Cabinet
Communication Cabinets Specification
Strong rack inside to be equipped with telecom equipment, power
source, battery, temperature control device and other attachments.
Digital display the temperature-setting, temperature alarm,
temperature parameters inside and outside, and all kinds of other
alarm information, etc.
Cabinet made of low thermal conductivity and fireproof material for
heat insulation fireproof.
Can be installed in any difficult places include the top of
mountain and the roof of buildings.
Wind-proof, sand-proof, rain-proof, sun-proof and anti-theft,
protection level IP55.
Dimension: W800*D800*H2100mm (included the door mounted air
conditioner thickness and depth size 840mm)
Internal Capacity: 42U, 19 Inch Rack.
Cooling System: Air conditioner (1000w) 110v 60hz
Door mount 1000W cooling capacity air-conditioner (Using the 110
VAC Power, provided with display and operation panel, could set the
temperature control point )
(1) 2 pieces of plate
(2) 1 piece of LED 4W lighting tube (Using the 110VAC Power, the
lighting tube Switch on and off controlled by the gate of the
(3) 1 piece of 7 sockets plug PDU
Double layer heat insulation structure (double sheet metal filled
phenol insulation board, the sidewall thermal insulation thickness
21mm, roof insulation thickness 45mm) which has top effective heat
Protection Grade: IP55
Cabinet Material: Galvanized plate
Mount Method: Floor Standing
Package: Wooden Box.
Wooden Box Size: L900*W700*H1400mm
Gross Weight: 330KG
|Type||Outdoor telecom equipment cabinet|
|External Size||1700mm*750mm*750mm, Customized|
|Cooling system||48vDC air conditioner 300w|
|Color||RAL7035 or customized|
|Dimensions||Standard or Customized|
|Surface||Power coating, plating|
|Structure||Internal Dimension(H*W*D)||Standard 1400*650*650mm and 1800*800*800mm or any customized size|
|External Dimension(H*W*D)||Standard 1700*750*750mm and 2100*900*900mm or any customized size|
|Weight||100~225kgs according to different size|
|Layout||1 compartment for battery and equipment cabinet, 1~2 for integrated
|Door||With one front door, with special lock for outdoor cabinet (support
|Material||Galvanized steel; double wall, thickness of outer plate:
0.5~1.5mm,thickness of inner plate: 0.5~0.8mm. Or customer
Heat insulation between inner wall and outer wall.
The insulation material is
20~45mm EPS or PVC/NBR.
|Cable enter method||Bottom φ50*5 or customer requirement.|
|Color||RAL7035/Pantone428C, powder coating finish|
|Battery Space||2-4 shelves or customer requirement|
|Battery Load||500kgs per shelve|
|Temperature Control||Cooling||AC220V air conditioner + DC48V fans|
|Options||AC/DC powered air-conditioner/Heat Exchanger/TEC|
|Lighting||LED lamp||48V LED lamps, it will turn on when the door is opened; it will
turn off when the door is closed.|
-40°C ~ +55°C
-50°C ~ + 70°C
-50°C ~ +70°C
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1120 × (1±5%)W/m2|