Add to Cart
Product Description
1. Wood fiber reinforced fireproof
2. Fireproof grade A,waterproof moisture proof
3. Fireproofing exterior wall panel
Product Name: Siding Board
Product Synopsis: use fiber reinforced silicate board as base material, strong wear resistance, moisture proof, fire prevention, prevent termites, surface cladding with wood texture, can replace the anticorrosive wood and natural logs.
Specification: 2440 mm *200mm; Thickness: 4 mm- 30 mm; Density: 1.15 -1.40 g/cm3
Performance: green environmental protection, 100% non asbestos, non radioactive material, can save a lot of wood;Beautiful and smooth surface, it has a natural wood texture, rich colors;Low shrinkage rate, strong and durable, good toughness, wear resistance, long service life;Termite resistance, moisture resistance, weather resistance, low thermal conductivity.Good dimensional stability, convenient construction;Fireproof performance meet to the requirement of grade GB8624A1 non-combustible material.
Purpose: villas and high-grade building exterior wall.
Application Case:
Item | Unit | Performance index | |||
8mm | 10mm | ||||
Surface Density | kg/cm2 | 1.25 | |||
Water Content | % | 5.2 | 8.55 | ||
Moisture Movement | % | 0.0605 | 0.062 | ||
Heat Shrinkage Rate | % | 0.475 | 0.42 | ||
Heat Conductivity Coefficient | W(m.k) | 0.14 | 0.12 | ||
Bending Strength | MPa | 16.9 | 16.6 | ||
Frost-resistance | 25 times freeze-thaw cycle | ||||
Watertightness | 24h | ||||
251.30 | |||||
Brief Introduction |
1.strong |
2.durable |
3.Vivid texture |
4.Good looking |
Features |
Fire Proof & Insulation |
Light weight & High strength |
Waterproof and sunlight Proof |
Easy Installation and cost effective |
Application |
Exterior wood texture boards can be used for villa, low-rise
building or interior decoration. The shadow part of the boards
shows a sense of beauty. Boards can be installed vertically between
each other, and are fixed on a smooth keel which is connected to a
building. The boards can be painted with different colors, which meets the need of individuation . . |
Size |
Thickness(mm) | Width(mm) | Length(mm) | Weight(kg/pcs) |
8 | 200 / 1200 | 3000 | 7 |
Parameters |
Deviation in thickness | ±0.5mm |
DensityDensity | 1100 - 1300kg/m3 |
Bending strength | ≥12MPa(EMC) |
Modulus of Elasticity | 7100±500MPa(Wet) |
Moisture content | ≤10% |
Wet expansion | ≤0.2% |
Thermal Conductivity | ≤0.3W/(m.K) |
Frost Resistance | -30℃ |
Temperature resistance | ±120℃ |
Incombustibility | GRADE A fireproof |
Raw Material Contents:
Raw Material | Content |
Cement | 44 % |
Quartz | 44 % |
Natural Fiber | 8 % |
Suspension | 4 % |
Composition of Finished Product | Content |
Crystalloid of Calcium Silicate | 52% |
Quartz | 30% |
Calcium Carbonate | 10% |
Cellulose | 8% |
Physical/ Mechanical Properties:
Item | Index | Unit |
Density | ≥1.30 | g/cm3 |
Thermal Conductivity | ≤0.30 | W/(m·K) |
Water Contain | ≤10 | % |
Water Absorption(Natural Color board) | ≤10 | % |
Moisture Movement | ≤38 | % |
Dry Shrinkage | ≤0.50 | % |
water impermeability | No Water Forms after being tested for 24 hours | |
Anti-freezing | No cracking or delaminating after 25 times of freeze-thaw cycles | |
Bending Strength | ≥14 | MPa |
Anti-impact | No Continuous Cracking After An Impact |
Safety Properties
Item | Index | Remark | |
Asbestos Contain | 0 | Can be used safely | |
Radioactivity | Internal Radioactive IRa | ≤0.5 | Can be used safely |
External Radioactive Ir | ≤0.5 | ||
Non-combustibility | Meet the standard of BS PART 4, 6 and 7/ GB 8624 Class A | Incombustibility Class A (the highest grade) | |
Fire propagation Class A | |||
Flame spread Class 1 |