Heavy Duty 4 Way PDU Power Distribution Unit For Installation On Kitchen / Cabinet
Brand Name:SFC/OEM
Certification:UL
Model Number:SFC-IEC-04A
Minimum Order Quantity:100PCS
Delivery Time:25Days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Address:
No.91 Taoyuan R.D. Yaozhuang Industry Jiashan County Zhejiang PR. China
Supplier`s last login times:
within 48 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
IEC320 C14 Inlet 4 Way Universal Sockets Power Strip , PDU Power Distribution Unit
This hard wired type power strip is good for installation in your
kitchen, cabinet, on the rack and so on. It is not for normal wall
outlets. There is no power cord and plug with this unit.
Features
- 5" to 14” - Durable Aluminium alloy Metal Housing Power Strip
- 2 Black ( white or grey or other) US NEMA 5-15R Outlets, Vertical or level Outlet Orientation
- Hardwired without Power Cord for Mounting at Your Desired Location
- One IEC C 14 Input on Each Side - (on the Top or Bottom Cover or Both Sides or Ends)
- Electrical Ratings: 100-125V 60Hz 15A
- UL C-UL Approved and Listed
- Outlets 0.12" to 8.39" (3mm to 213mm) apart center to center
- With IEC C13 Cable Easier put in C14 inlet and Faster Installation - Higher Efficiency
| Parameter | |
| OUTPUT | |
| Frequency compatibility | 50/60Hz |
| Output watts | 2400W |
| Output volt amp capacity (amps) | 10A 13A 15A 16A |
| Outlet quantity / type | 4*IEC320 C13 |
| Outlet spacing | any in. |
| INPUT | |
| Recommended Electrical Service | 15A 125V/13A 250V/16A 250V/10A 240V |
| Input connection type | IEC 320 C14 |
| Input plug features | Black or other |
| Input cord length (ft.) | 5 to 25 |
| Input Housing length (in) | 12-1/4 to 72 |
| Input cord gauge, type | 14AWG/3 SJT |
| Voltage compatibility (VAC) | 125 |
| PHYSICAL | |
| Unit Dimensions (HWL/mm) | 32*60*L/34*43*L |
| Material of construction | Aluminum |
| Mounting accessories included | Includes mounting clips |
| Receptacle Color | Black or other |
| AC line cord color | Black or other |
| Form factors supported | Supports vertical or horizontal mounting in rack enclosures, raceways, laptops cat and a variety of other applications |
| CERTIFICATIONS | |
| Power Tap | IEC |
| Approved by | CE |
SAFETY WARNING:
Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer.
Never install this unit during a thunder storm.
Switch off the power before you start installation work.
This unit is for indoor use only.
This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.
Risk of Electric Shock!
INSTALLATION GUIDE:
Before installation, you may need to get a IEC C13 Outlet. Decide
your wire gauge, and ask store attendant for assistance what color
of connectors you should get) from your local hardware or electric
supply or home improvement stores.
Minimum tools required: A fine to medium fine philips screw driver,
and a pair of scissors, and a pair of mid size slip joint pliers
1. Turn off electricity in the house
2. Decide where to place this unit
3. Choose the side you want the cord exit to choose IEC C14 Built in power strips
4. Match the color of the wires and secure the wire connection with proper wire connectors built in IEC C13 plug.(different wire gauge use different colored wire connectors)
- Mount the power strip where you want it to be:
A) For power strips with mounting tabs on both ends: screw down the unit on the floor, wall or in your cabinet or on your rack, where you want it to be
B) For power strips without mounting tabs, but to be mounted with clips, place the unit where you want it to be first, make marks where to install the clips, which normally should be placed about min 2”<power strips length away from each end, and then screw the clips down with screws provided. Then, snap the power strip in on the clips - Push IEC C13 outlet plug into IEC C13 inlet power strips , and push switch to ON. Turn electricity back on, you are ready to go.
Note:
We warmly welcome all customers to do OEM and ODM production.
Heavy Duty 4 Way PDU Power Distribution Unit For Installation On Kitchen / Cabinet
Inquiry Cart
0