Product Details
Electricity UPS System Special Cabinet Electricity UPS 10-100KVA
Product Snapshot:
Model: 10-100 KVA
Nominal voltage: 220/680VAV
Nominal frequency: 50Hz/60Hz
Output power factor: 0.8
Key features:
- Adopt full digital control technology
- Intelligent detection and monitoring function
- Digitally control the static switch with zero switch
- Full isolation between input and output
- Super low output zero earth voltage
- DC UPS isolated with utility power completely
- Cubical design with power standard (customization)
- Multifunctional protection for overvoltage, under voltage, over
current, short circuit and over temperature and so on.
- Large-screen LCD monitor with Chinese and English operation
interface
- Ultralong 256 event record, user-friendly analysis and management
to the situation of the power supply (touch screen optional)
- Static bypass has a strong anti-overload capability
Application:
Petroleum, chemical industry, gas and power station and so on.
Control system:
It adopts microprocessor bus control technology, three core
processor controlling rectification, inversion and parallel
connection respectively, to ensure the real-time control of the
rectifier, inverter and static switch and the coordination of every
power part, characterized by increased control of aging, higher
reliability, enhance of the efficiency of the whole UPS system and
the output technical parameters are better than that of the device
with same capacity.
Rectifier:
6 pulse or 12 pulse fully controlled bridge (6 or 12 SCR) compose
rectifier. Its function is to input AC 3880V to DC220V or so by
rectification. “slope” start (soft start) is the control feature,
which means output voltage of the rectifier increase from 0V to
220V within 10 second and has no impact on the power grid.
Inverter:
SPWM(sinusoidal pulse width modulation) , formed by 6 IBGT high
power tubes, is composed of full-bridge-control.
Large Capacity of Overload of the UPS Inverter
110% load --60'
125% load --10'
150% load --1'
200% single phase load --30"
Good Capacity of Resistance to Output Short Circuit Current
Limiting and Period Load Impact
Static switch:
- Not sync automatically switch
- Optional bypass cabinet: Isolating transformer and the bypass
voltage regulation
- Intelligent monitoring:Working status and data of UPS are transmitted to DCS system in
real-time via RS232/RS485, passive contact and power transmitter,
which finally realize Intelligent monitoring.
Unique option:
- SNMP card
- Dry contact card
- Signal transmitter
- Bypass isolation and voltage regulation
- Increase feeder circuit (standard for 8 loops)
- 12 pulse rectifier
- The appearance of special models(standard dimension:800×600×2260mm)
Our Service:
- 2% spares together with shipment for urgent issue.
- All of the necessary documents such as drawing, manual etc.
- We will provide the online service by mail
- We can despatch engineer to assist you solve the problem if
necessary (But you are requested to pay for the cost of ticket,
hotel etc. ). you can despatch engineer(s) to our company to get
training.
- One year warranty
Technical Specification:
CND310 10KVA-100KVA |
Model (KVA) | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 80 | 100 |
Rating capacity(KW) | 8 | 12 | 16 | 24 | 32 | 40 | 48 | 64 | 80 |
Rating voltage | 220V(one-phase) /380V(three phase) |
AC input |
Voltage range | ±25% |
Frequency range | 50,60Hz±10% |
Soft start | 0-100% in 5” |
Power factor | 0.95(with input filter) |
Bypass input |
Permitted voltage range | ±15% |
Frequency range | 50/60Hz±5% |
Output |
Voltage accuracy | 220V±1%(steady load) 220V±3%( fluctuating load) |
Permitted Frequency range | 50/60Hz±0.05Hz(powered by battery) |
Power factor | 0.8 |
THD | Linearload<2%, non linear load<4% |
Dynamic transients | <5% |
Current crest ratio | 3:1 |
Overload capacity | Normal in 110% load, 125% for 10min |
Efficiency | Double switch:94%, ECO:98% |
DC |
Battery voltage | 220V |
Cutoff voltage | 185V |
Maximum discharge current | 36A | 55A | 73A | 109A | 145A | 181A | 218A | 291A | 364A |
Penal display |
LCD | Chinese/English UPS status, operation instruction input voltage,
output voltage, current, frequency, battery voltage, value of
charge and discharge current, accident display, warning |
Environment |
Temperature | 0ºC-40 ºC |
Humidity | 0-95%(no condensing) |
Storage temperature | -25 ºC—55 ºC |
Altitude | <1500m |
Company Profile
Shenzhen CONSNANT Technology Co., Ltd. (simple name: CONSNANT) is a
professional manufacturer engaged in research, development and
production of UPS (Uninterruptible Power Supply) including the
Modular UPS, Outdoor & Indoor UPS,Industrial special UPS, Low
Frequency & High Frequency Online UPS and Solar Power System
both for home appliance and telecom equipments.
Our product has obtained the CE, ISO 9001, ISO 14001 and local
Chinese TLC certificates. Having reached good sales results in
China, we are now expanding our sales overseas.
We are proud of the fact that most of our company’s engineering
staff is well-qualified and has gained experience in relevant
fields more than 10 years. In order to protect your equipment from
electrical supply network instability, we offer innovative
solutions that obtain higher availability systems, improve
efficiency and offer flexible solutions to meet specific needs and
range of application. The UPS product is widely used in data and
computing centers, finance institutions, banks, within industry and
medical fields.
We welcome any kind of collaboration, will enjoy any opportunities
of dealing with new costumers: from distributors to ultimate
consumers, undertake both wholesale and retail orders, including
the sale of finished goods or parts.
If you start work with us, you will not only get high-quality
product at reasonable price, but also maintain the profitable
conditions for further years.
We are located in the world-famous High-Tech center – Shenzhen
city, China. Our factory is close to airport. If you are lucky to
visit the city, you are kindly welcomed to visit our factory.