Industrial Ultrasonic Cleaner for the Motorcycle Industry to Remove Tough Paint , Rust

Ultrasonic Cleaner for the Motorcycle Industry to Remove Tough Paint , Rust

Motorcycle repair, rebuild, and manufacturing companies can rely on ultrasonic cleaning technology to remove dirt and contamination from almost any part of a bike much faster and more efficiently than traditional, dirty, and time-consuming cleaning methods.

Ultrasonic cleaning is powerful enough to remove tough paint, rust, glued-on gaskets, and heavy layers of baked-on carbon in the tiniest of crevices and can make parts look and operate like new.

We know that the cleanliness of the parts you process reflects on your business and reputation. Count on us to provide the tools, training, and support you need to maximize your production and profitability.

Mainly application:

• injector jet nozzles
• carburetors
• bearings and gear sets
• brake calipers
• cylinder heads
• seals on the pistons
• oil and coolant hoses
• gearboxes
• other parts of the bike

What can remove:

• carbons
• varnishes and paints
• oil and grease
• metal shavings
• lubricants
• rusts
• carcinogens
• dirt, dust, and grime

Why we use ultrasonic cleaner?

With cavitations effect Ultrasonic cleaning technology is widely used in engine block, engine parts cleaning, semi-conductor silicon chip cleaning, optical glass cleaning, parts of watch and cock cleaning, jewelry cleaning, polyester filtration core cleaning, widow blind cleaning and etc.

Why we need drying system?

1. If your cleaning objectives are easy to get rust, a drying system is needed to quickly dry the parts to avoid to be rusty.

2. If you want to save cost, you can just buy a single tank ultrasonic cleaner, and you can use a spray gun to dry the parts. But it will waste you some time.

How to judge a good ultrasonic cleaner?

Actually the principle of the diferrent ultrasonic cleaners is the same, and the most important part of the cleaner is the PCB. So you need to make sure that the factory has an experienced engineer and good after service can be offered.

The cleaning scope of AG Engine block ultrasonic cleaning machine

Suitable for all types of engine parts

AG engine block ultrasonic cleaning machine effectively and thoroughly clean all types of engine parts

01: Automotive: thoroughly removes carbon deposits, grease, and other types of dirty and contaminants from carburetor, exhaust manifolds, cylinder blocks, 2-stroke and 4 stroke motorcycle engines, snow machines, ATV cylinders and heads, and more.

02: Marine: Suitable for inboard and outboard motors, the cleaning chemistry is both thorough and gentle on the aluminum parts reducing the risk of future corrosion

03: Aircraft: The high performance demands of aircraft engines establish the need for an intensive cleaning process that will restore the engine part to near original condition, our engine block ultrasonic cleaning machine easily, thoroughly, and safely clean both large and small parts, turbine blades, fuel nozzles, generator components, brakes and other parts that require periodic cleaning are all effectively and thoroughly cleaned using the ultrasonic cleaning process

Features:

All imported stainless steel structure, thickening Stainless steel plate,

adopting high Q value transducer and German binding process large power of ultrasonic output, set solvent heating and temperature automatic thermostat instrument, and temperature control range 0~100, base solvent, no pollution

Range: semi-conductor silicon chip, optical glass, parts of watch and clock, glasses, Jewelry, polyester filtration core and etc

The Advantages of ultrasonic cleaning machine:

Ultrasonic cleaning machine delivers high performance industrial strength, cleaning action on Engine block, carburetor and Engine parts

01: Cleans carbon deposits from carburetors and all manner of engine parts

02: Removes stubborn oil grease, lubricants, paint, rust, and dirty (with-pre-cleaning in same cases

03: Aluminum sate

04: Penetrates deep into the part and cleans holes, small apertures and crevices

05: Clean sensitive parts like wiring and plastic without damage

06: Does not require line-of-sight for effective cleaning

07: Ensures part longevity due to high degree of cleanliness

Specifications:

AG SONIC technology limited is a collection of ultrasound technology research, ultrasonic product development, production, sales and technical services in a body's national high-tech enterprises. We have our own R&D department with the factory in Songgang, Shenzhen. Our engineers are engaged in the filed for more than 8 years, so we have our own improved PCB design for stable and durable industrial use. Not only standard ultrasonic cleaner, but also any non-standard can be designed by engineer.

Product offered:

●Household ultrasonic cleaner

●Tabletop ultrasonic cleaner (mechanical series, digital series, power adjustable series)

●Industrial standard ultrasonic cleaning machine

●Customized ultrasonic cleaning machine

Service offered:

ODM/OEM

If you have good idea of ultrasonic applications, we can help you to make it come true.

Our Market:

We sell ultrasonic machines to worldwide countries, and our professional team will offer you the best after-sales service. We believe after-service is as important as quality and price.

Our faith:

Only action can make the goal come true!