Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner

GUIDELINES FOR self Adhesive Insulation Pins

USE: These hangers are designed to mechanically hold insulation material to various surfaces. It is very important for the user to determine the suitability of this product for each application. Discretion must be used in application, and we recommend that the user first perform a test application to satisfy himself of the desirability of using the product for the user’s particular purpose.

self Adhesive Insulation Pins​ CAUTION:

The user is responsible for determining the suitability of the application. Hangers must be applied to a clean, dry, non-porous surface
that is free of all oil, films, dust, rust, etc. Self-adhering hangers are not recommended for concrete or painted surfaces. It is important
that they not be used where operating temperatures can exceed 150° F at the point of adhesion. Hangers should not be used on ceilings
or roofs of metal buildings or any surface the reverse side of which may be exposed to heat concentration from sunlight, etc., direct or
otherwise. Load per anchor should not exceed 3 lbs.

self Adhesive Insulation Pins​ APPLICATION:

Best results are obtained when ambient temperature is above 40° F at the time of application. Remove the release paper from the base
plate and apply hanger to a suitable flat surface. A firm straight, forward pressure should be used. Do not twist. Due to the quick-tack nature
of the adhesive, it is very important that the release paper not be removed until ready to apply the hanger. Insulation may be applied immediately after properly securing the hanger. Hangers should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life is estimated at 2 years if stored as recommended.



WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly



APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place

HuiHao Hardware Mesh Product Limited

company details
	huihao descrtption _________________________________________ Huihao hardwarw mesh product limited is professional in the manufacturer of weave wire mesh and perforated metal products from 1991years.For example- insulation pins &self locking washer is made by CNC punched machines.
	huihao machines and production lines _______________________________________ The huihao factory covers an area of 9000 square meters. 80 sets of CNC machines are for manufacturing insulation festeners&accessories and perforated metal screen. 150 sets of weaving machines are for manufacturing Architectural Wire Mesh&decorative wire mesh. 20 sets of Automatic nail making machine are for manufacturing for nails and screw. 10 sets machines arefor making ring mesh and metal drapey.laser cut machine,bend machine,Automatic nail making machine and other machines supply service for our all products.
	our customers _____________________________________ Our customers come from more than 90 countries around the world, mainly to North America, South America, Middle East and Europe.Customers include large distributors, project bidders and individuals directly using users
	Huihao honors ___________________________________ ISO9001-2008 system certification, ABS cretification,BV, CCS, Material chemical test report, SGS Product test report
	Huihao package __________________________________ Standard export packaging: carton, fumigation-free tray, plastic bag and plastic box. Robust and easy to handle. Save space and save costs for customers.at the same time, we accept OEM/ODM. and we can be your requiremets to make the logo and package.
	Huihao delivery ____________________________________ timely delivery by sea, air or by dhl,tnt,fedex and ups. and we can supply door to door service