Add to Cart
Ferruled Balustrade Railing Infill Stainless Steel X-tend Cable
Wire Mesh
Cable Wire Mesh Specifications Sheet :
Hole Size (Opening) | 1.2MM(3/64) (7 x 7 ) | 1.6MM(1/16) (7 x 7 ) | 2.0MM(5/64) (7 x 7 ) | 2.4MM(3/32) (7 x 7 ) | 3.2MM(1/8) (7 x 19 ) |
20 x 35mm | YT-1235 | ||||
25 x 42mm | YT-1225 | YT-1625 | |||
30 x 52mm | YT-1230 | YT-1630 | YT-2030 | ||
35 x 60mm | YT-1235 | YT-1635 | YT-2035 | ||
38 x 66mm | YT-1238 | YT-1638 | YT-2038 | YT-2438 | |
40 x 69mm | YT-1240 | YT-1640 | YT-2040 | YT-2440 | YT-3040 |
50 x 86mm | YT-1250 | YT-1650 | YT-2050 | YT-2450 | YT-3050 |
60 x 104mm | YT-1260 | YT-1660 | YT-2060 | YT-2460 | YT-3060 |
70 x 120mm | YT-1270 | YT-1670 | YT-2070 | YT-2470 | YT-3070 |
76 x 131mm | YT-1276 | YT-1676 | YT-2076 | YT-2476 | YT-3076 |
80 x 138mm | YT-1280 | YT-1680 | YT-2080 | YT-2480 | YT-3080 |
90 x 154mm | YT-1290 | YT-1690 | YT-2090 | YT-2490 | YT-3090 |
100 x 173mm | YT-12100 | YT-16100 | YT-20100 | YT-24100 | YT-30100 |
120 x 206mm | YT-12120 | YT-16120 | YT-20120 | YT-24120 | YT-30120 |
1. Material of Stainless Steel Zoo Wire Mesh : Stainless steel
304,304L,316,306L etc.
SS304 | (%) C:≤0.07, Si :≤1.0, Mn :≤2.0, Cr :17.0-19.0, Ni :8.0-11.0, S :≤0.03, P :≤0.035 |
SS316 | (%) C:≤0.08, Si:≤1.00, Mn:≤2.00, P≤:0.035, S:≤0.03, Ni:10.0-14.0, Cr:16.0-18.5 |
SS316L | (%)C:≤0.03, Si:≤1.00, Mn:≤2.00, P:≤0.045, S:≤0.030, Cr:16.0~18.0, Ni:12.0~15.0 |
2. Ferruled mesh is of the same physical properties with the knotted mesh, the only difference is in the combination style, the stainless wire rope are combined by the ferrules which are made of the same grade stainless steel.
Finished diamond mesh style when it is stretched at 60 degree angle
;
Recommended Balustrade Infill Cable Wire Mesh:
Material | Cable Diameter | Hole Size | Normal Break |
SS304/316/316L | 1/16" (1.6MM) | 2.5" x 2.5" | 480 LBS |
SS304/316/316L | 1/16" (1.6MM) | 2" x 2" | 480 LBS |
SS304/316/316L | 5/64" (2.0MM) | 2.5" x 2.5" | 676 LBS |
SS304/316/316L | 5/64" (2.0MM) | 2" x 2" | 676 LBS |
SS304/316/316L | 5/64" (2.0MM) | 3" x 3" | 676 LBS |
Balustrade Infill Cable Mesh is manufactured from high-grade
stainless steel cables of material class 1.4401, AISI316 / AISI316L
; X-tend type cable mesh is custom manufactured to suit your
balustrade, railing or architecture application ; Mesh can be
applied in either a vertical or horizontal direction, again
dependent on the balustrade or railing design ; Diagonal and
irregular shapes can also be supplied.