Add to Cart
1204 Series Bi - Color / Tri - Color Led Emitting Diode With Small
Package
Feature :
1. Low power consumption,high efficiency, long lifetime.
2. Pure gold wire process for stability security .
3. High temperature resistance, anti-yellowing resistance and UV
resistance chip bonding glue .
4. Lead free, RoHS-compliant.
5. Extremely wide viewing angle.
6.Suitable for all SMT assembly and solder process.
7. Available on tape and reel.
8. Moisture sensitivity level: 3.
9.Package:3000pcs/reel.
10. RoHS compliant.
Description :
The White LED which was fabricated using a blue chip and phosphors.
Application :
1. The power signal indicator.
2. Small size LED backlight.
3. General use.
Package and size :
Electrical / Optical Characteristics at Ts=25°C
Part No. | If (mA) | VF(V) | IV (mcd) | WD(nm) | View angle |
RF-P3S115TS-B09 | 20 | 2 | 90 | 622 | 160° |
20 | 2 | 50 | 570 | 160° | |
RF-P3S115TS-B37 | 20 | 2 | 50 | 630 | 160° |
20 | 2 | 40 | 570 | 160° | |
RF-P3S115TS-B51 | 20 | 2 | 90 | 587 | 160° |
20 | 2 | 40 | 570 | 160° | |
RF-P3S115TS-B52 | 20 | 2 | 60 | 630 | 160° |
20 | 2 | 90 | 587 | 160° | |
RF-W1S118TS-A42 | 20 | 2 | 90 | 622 | 160° |
20 | 3.1 | 560 | 522 | 160° | |
20 | 3.1 | 140 | 470 | 160° | |
RF-W2S118TS-A41 | 20 | 2 | 60 | 630 | 160° |
20 | 3.1 | 560 | 523 | 160° | |
20 | 3.1 | 140 | 470 | 160° |
Absolute Maximum Ratings at Ts=25°C
Parameter | Symbol | Rating | Units |
Power Dissipation | Pd | 48 | mW |
Forward Current | IF | 28 | mA |
Peak Forward Current | IFP | 60 | mA |
Reverse Voltage | VR | 5 | V |
Electrostatic Discharge | ESD | 2000 | V |
Operating Temperature | Topr | -40 ~ +85 | ℃ |
Storage Temperature | Tstg | -40 ~ +85 | ℃ |
junction temperature | Tj | 95 | ℃ |
Note:
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is
0.1V.
3. The below color coordinates measurement allowance tolerance is
0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the
absolute maximum rating of the product.
6. All measurements were made under the standardized environment of
Refond.
7.When the LEDs are in operation the maximum current should be
decided after measuring the package temperature,junction
temperature should not exceed the maximum rate.LED
Technical Support
Pass the international benchmarking enterprises and third-party SGS
social responsibility audit, in line with EICC electronics industry
code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other
international standards in Third party testing result.
TS16949
ISO9001
QC 080000
ISO14001
OHSAS18001
ISO17025
We use scientific research and innovation as a driving force for
development, build the core competitiveness of enterprises, is
committed to every customer can get more secure, more
environmentally friendly products.
Laboratory
Experimental Center was established in 2013, covers an area of over
600 square meters
CNAS Certification
December 2015 CNAS certification, included in the national
laboratory directory. For the company's technological innovation
and product development to provide a complete means of testing,
product quality management to provide a wealth of reliable test
data.