Add to Cart
White Color Truck Truck Tool Box LED Lights With Automatic On / Off Function For Luggage Box , Car Trunk Cargo Area
Features of Sunway SW-3199 Truck Tool Box LED Lights:
1. with 3pcs AA batteries, voltage 4.5V, standby life reaches up to more than 2 months, more than 16 hours continuous lighting services.
2. 10pcs SMD2835 LEDs per strip, perfect for lighting up the entire trunk.
3. AA*3 square battery box + built-in control circuit + exterior LED strip, 3M velcro at the bottom of square box for easy installation.
4. Horizontal sensor: turn up or down in a horizontal direction, when the turning angle exceeds 40 degree, the light turns on automatically, the reaction time is 2-3 seconds.
5. Vertical sensor: turn left or right in a vertical direction, when the turning angle exceeds 40 degree, the light turns on automatically, reaction time is 2-3 seconds.
6. Low power consumption, long service life up to 30,000 hours
7. Rear velcro for box attachment.
8. Double-sided tape included for easy installation, just peel and stick onto any flat surface.
9. CE, ROHS approved.
Application of Sunway Truck Tool Box LED Lights:
The Truck Tool Box LED Lights is perfect For luggage box lighting, car trunk cargo area or interior illumination, so you can find everything you need very easy even in the night.
Parameters of Sunway Truck Tool Box LED Lights:
Parameter | Specification |
Model No. | SW-3199 |
CRI | Ra>70 |
Input current | Max. 200mA |
Input Voltage | DC 4.5V |
LED | SMD2835 |
LED quantity | 10PCS |
Luminous flux | 60Lm±10% |
Static current | <16UA |
Power | Max. 0.8W |
Beam angle | 120° |
Color Temp | 5000-6000K |
Working Temp | -20~+45℃ |
Storage Temp | -30~+70℃ |
Lifetime | more than 30000 hours |
Working time | 12-20 hours (deviated from battery quality and capacity) |
Case material | ABS plastic |
Dimensions | 64*72*23mm |
Length of strip | 1.0M |
Weight | (160g-200g)±10g |
Package | Blister card package |
Dimmer | On and Off switch |
Certification | CE, Rohs |
Package for Sunway Truck Tool Box LED Lights:
1. Packing size (Blister L*W*H): 288*147*33MM
Net weight: 265g/pc
2. Inner size (L*W*H): 285*145*145MM
3. Carton size (L*W*H): 630*610*340MM
Gross weight: 16.5Kg
Mark: 1pc/blister, 16pcs blister/inner box, 3 inner boxes/carton, total 48pcs
Control Box Installation:
a) As shown in the picture below, open the door and place the control box with its front side to the horizontal direction of the door axis, make sure the axis is horizontal direction, find the best position in the door to install considering easier operation in future.
b) Find the best position to install the Lights to make sure the best lighting condition of the strip, and the position should be interfered with by other objects.
c) Clean the installation place carefully to make sure dust free, 3M might peel off if the place is not clean.
d) Velcro installation: remove the backing paper and paste the velcro to the proper place, fix the control box well to the velcro.
e) LED Lights installation: remove the backing paper, paste the Lights under proper force to make sure it is pasted well.
f) Connect the DC connector to the control box and sort out the cable properly to make sure the space is tidy and beautiful.
g) Make sure batteries available and right anode and cathode in the control box before use.
h) Turn the switch to ON position after installation, the light turns on and off automatically when open and close the door, the reaction time is 2-3 seconds.
i) Battery replacement: disconnect the DC cable, remove the square control box, open the battery cover, put batteries in with correct anode and cathode, then chuck the cover.
Cautions:
1. Read the manual of the Truck Tool Box LED Lights before installation.
2. For indoor use only.
3. Do not look directly at LEDs.
4. Recycle old batteries whenever possible. If recycling is unavailable in your area, dispose of old batteries in accordance with local regulations.