Add to Cart
manual operate 12x200 mm hydarulic punching machine for electric switch
Specifications:
This machine is designed with reference to advanced foreign products and combined with domestic practice to improve the working efficiency and ensure the safety of the operation. It is suitable for the field construction of large workshop and transmission and distribution work, and the electrical appliances factory such as distribution cabinet and switchgear cabinet. High flexibility, small volume and strong function, high productivity and high efficiency. Low noise and harmless processing, the finished product is beautiful and will not cause pollution to the working environment.
1. mirror surface of the working face, the desktop through grinding
and chromium plating, presenting a precise and smooth working face.
2. Quartet valve control switch precision guide, correct use of punching machine, curved plate tool, cutting tool and hydraulic pressure embossing tool position.
3. overall modeling color bright, surface baking paint, and the
phosphoric acid skin mold antirust treatment, wear-resistant and
impact.
4. safe and solid electric pump switch, which can control and
return oil.
5. design of copper scrap integrated bag and opened his mouth and a
chip outlet, the slide type can be cut, wear a copper scrap, not
scattered and messy everywhere.
The bottom of the
6. product is equipped with a pulley, and the pulley is equipped
with a foot switch so that the operator can move to the best work
site and fix the product.
7. for the convenience of the operator, the product add a tool
cabinet in the design, so that the tool storage, avoid misplacing
and loss of tools.
Name | Portable busbar machine(Combined type) |
Number | DHY-200 |
Function | punching |
type | CH-70 |
Maximum pressure of punching | 36 tons |
Maximum thickness of punching | Copper:12mm, steel:10mm |
Mould parameter | 3/8"(ф10.5mm2),1/2"(ф13.8mm2),5/8"(ф17.5mm2),3/4"(ф20.5mm2) |
Weight | 37KG |
Oversize(cm) | 27*39*16 |
Type | CWC-200 |
Function | shearing |
Maximum pressure of shearing | 30 ton |
Maximum thickness of shearing | Copper:12mm, steel:10mm |
Maximum width of shearing | 200mm |
weight | 26KG |
Oversize(cm) | 33*44*20 |
Type | CB-200A |
function | Horizontal bend |
Maximum pressure of bending | 30 ton |
Maximum thickness of bending | Copper:12mm, steel:10mm |
Maximum width of bending | 200mm |
weight | 29KG |
Oversize(cm) | 29*38*20 |
Name | Electric pump |
Maximum pressure | 70Mpa |
minimum | 7 Mpa |
power | 750W |
rate | 50HZ/60Hz |
Oil storage | 7L |
High-Pressure flow | 0.9L/min |
Low-Pressure flow | 5.0L/min |
voltage | 220V |
speed | 1400r/min |
Oil type | Antiwear hydraulic oil |
Oversize(cm) | 36*43*28 |
weight | 24KG |
whole dimension | 1200mmx1300mmx800mm |
Total weight | 210KG |
Main characteristic:
The punching machine have hand operator and footer pedal two operation method, when you punching material just step on the footer pedal the machine will running, once stop step the footer pedal the machine will stop, it is very easy to operator.
CH-60 use 750W electric pump, the pump is 100% original, compare with others our machine with long service time, becuase the pump is good enough, the solenoid valve of the pump is high quality.
Before use the machine please add NO.20-NO32 hydraulic oil first.