High Voltage Primary Wireless Current Sensor GF2018 Waterproof For Data Transfer

GFUVE High Voltage Wireless Primary Current Sensor GF2018

GF2018 is the newest version of the wireless primary current sensor. Rational design and adopts 433M transmit technology for data transfer. It makes the current data recording more stable and accuracy. The primary current sensor using the PC and ABS material, new waterproof technology, it can keep working on line in extreme weather.

• Collect and analyze load profiles
• Easily clamps to the line in a few seconds
• Check for load balance
• Patented open CT sensor with ±1% accuracy
• 433M communication with no annoying cables to connect
• Recorded data quickly downloads into the user's PC
• PC-Link Software interface downloads directly into Microsoft Excel and PDF file
• Generate reports and create graphs for profile analysis

• DESCRIPTION

  The Primary current sensor uses the same sensor technology as the original Rogowski coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected.

  The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line.

  The Primary current sensor is equipped with a 433M wireless port for communicating the recorded data into the user’s PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current recorder.

  The housing of the Primary current sensor is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions.

  PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M Port.

• Basic parameters
  Recording ammeter kit	3 wireless current sensors (GF2018A, GF2018B, GF2018C) 433 HHT(handheld terminal) or 433M wireless data reader(GF2018R) PC-LinkSoftware software(GF2018S) Carrying case
  Data recording interval	1min, 5min, 10min,15min, 30min; Time can be set from 1 second to 60 minutes
  Communication distance(wireless)	Max 100m
  Communication	433M, 868M or 915M (option)
  Installation	Installation with electricity; Disassemble with electricity
  Battery	3.6 volt lithium battery,9000mAh; Battery can be replaced
  Software requirements	PC-Linksoftware & microsoft Excel
  Processor	100 MHz or higher (200 MHz or higher recommended)
  RAM	32 MB, 64M recommended
  Drive space	15 MB to load software, 10 MB of operating Space
  Use of position	Outdoor or indoor
  Electrical parameters
  Range of operation
  Voltage	69kV,35kV,20KV, 10kV, 6kV, 0.38kV
  Current	0 to 400A; 0 to 800A; 0 to 1500A; 0 to 3500A;
  Sensor opening	Up to 3.3 cm
  Resolution
  Amps 1 to 99.9A	0.1A
  100 to 300A	1A
  Amps accuracy	±1% of reading plus 2 counts
  Frequency	60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available
  Mechanical parameters
  Weight (kg)	0.48
  Carrying case(kg)	6.5
  Environmental conditions
  Operating temperature	-40°C to 60°C

Beijing GFUVE Instrument Transformer Manufacturer Co., Ltd. was established in 2008. It combined design, manufacturing and sales together as one high-tech enterprise. GFUVE Instrument Transformer company mainly produces less than 35kV current transformer and voltage transformer, split core ct and current clamp models etc.

GFUVE is a leader manufacturer of split core current transformer products in China. It is professional in current transformer, potential transformer and related accessory. The product of outdoor split core current transformer develops very quickly in the global market. Our company has achieved certification to ISO9001. The products are sold to over 30 provinces in China and exported to overseas including South America, Middle East, Southeast Asia, Australia and Africa.

Please contact us now for further business relationship. We are here to provide you the best service and the best product.