Software can be automatic analysis such as polymer melting point, enthalpy change, the glass transition temperature, phase transition temperature, dynamic parameters

l Specification:

• LCD liquid crystal blue backlight display, display information is very more, including setting temperature, sample temperature, oxygen flow, nitrogen flow, differential thermal signal, all kinds of switch state
• USB communication interface, universality, communication and reliable don't interrupt, support from recovery connection function.
• Furnace body structure is compact, Temperature rise rate arbitrary adjustable. To improve the installation process, all adopt mechanical fixed way, completely avoid the furnace internal colloid to differential thermal signal pollution

• Double temperature probe, ensure that the height of the sample temperature measurement repeatability. The temperature probe installed in the furnace wall, used in PID control the whole furnace temperature, but due to the temperature of the thermal
• inertia, conduction to the temperature of the sample has certain deviation, and the deviation degree of four seasons are different, therefore, by a single temperature probe temperature control and temperature measuring, whether differential thermal signal or temperature signal, the error is large; The instrument in the sample bottom install a temperature probe to measure the real temperature of the sample, and use our special temperature control technology, control furnace wall temperature makes the sample temperature reach setting temperature.
• Digital gas mass flow meter automatic switching two way atmosphere flow, switching speed, stable time is short.
• Mark with standard samples, the convenience of our customers correction constant temperature coefficient.
• Furnace cooling interface, the convenience of our customers rapid cooling.
• Software adaptive each resolution computer screen, the software automatically according to the computer screen size adjust every curve display mode. Support notebook, desktop, Support Win2000, XP, VISTA, WIN7 operating system, etc

• Support user programming procedures, to realize the automation of measuring steps. The software provides dozens of instruction, the user can according to your own measurement steps, agile combination each instruction, and save. Complex operation is simplified into a key operation.

Performance

1: Temperature Range:Room temperature to 500 ℃

2: Temperature resolution: 0.1 ℃

3: Heating rate: 0.1 ~ 80 ℃ / min
4: DSC range: 0 ~ + 500 mw

5: DSC resolution: 0.01 mW

6: DSC sensitivity: 0.1 mW

7: Working power supply: AC 220V 50Hz

8: PC interface:USB

Application:

DSC-500B can be employed for the characterization of a great variety of materials. It is used in polymers; and here not only in plastics and rubber processing, but also in the pharmaceutical and cosmetic industries, food packaging and technical textiles.

Differential scanning calorimetry (DSC) as a programmable temperature of the heating effect of the classical thermal analysis method, in today's all kinds of material and in the field of chemical industry research and development, process optimization, and quality control, quality control and failure analysis, etc. Various kinds of occasions have been widely applied. Using DSC method, we could study the inorganic material phase transition and polymer melting and crystallization process, drug polymorphism, oil and other food solid/liquid ratio, etc. Widely used in plastic, rubber, paint, food, medicine, biological organisms, inorganic materials, metal materials and composite materials

Standard Configuration list:

1: DSC- 500B 1set

2: aluminum crucible 300pcs

3: standard test samples (indium, tin, zinc each ) 1pcs

4: The power cord and USB cable each 1set

5: Software CD a embedded operating instruction manual 1pcs

6: Tweezers 1pcs

7: spatulas 1pcs

8: relief valve special custom joint 2pcs

9: oxygen and nitrogen cable every 5 meters

10: quick connector 2pcs

11: software dog 1pcs

12: certificate and the quality guarantee

Beijing Jinshengxin testing machine Co., Ltd, covering 20,000 square meters, is located in Jinhaihu Town of Beijing. Since founded in 2003, our company has been devoted to the research, development and manufacture of testing machines for metallic and non-metallic materials, especially building materials. We have kept a close cooperation bond with many colleges and research institutes for technical exchange.

Through these years' efforts, our company has gained rapid development because of outstanding talents and advanced science & technology. Now it has become one of the best companies in the area of testing machines. All of our products have passed the evaluation of CMC and ISO9001. The brand of our products is "Jinhaihu". Our main products are Universal tensile testing machine, pipe hydrostatic pressure testing machine, impact testing machines, melt flow indexers, heat distoration temperature-Vicat softening point testers, liquid analyzers, prototype machines, etc. For the reliable quality and high precision, our products are very popular in China and abroad.

If you want to buy testing machines, our products are your first choice!

Looking forward to cooperating with you!