Add to Cart
Decoration Expanded Aluminum Mesh , 0 . 4mm Thickness Red Coating Expanded Mesh
1. Description of Expanded Metal Mesh:
Expanded Metal is made from sheets of solid metal that are uniformly slit and stretched to create diamondshaped openings. It can bemade from a wide range of materials, chiefly expanded steel mesh, aluminum expanded metal mesh,expanded stainless steel, expanded nickel and other metal , as steel reinforcementmaterials in petroleum, chemical industry and building decorations. Thickness available from 0.5mm to 8mm.
2. Common Specification:
Materials:
low carbon steel,Aluminum plate,titanium plate,Al-Mg alloy plate.
Surface Treatment:
1.Without treatment is ok
2. Galvanized : Electric galvanized, Hot-dipped galvanized.
3.Anodized (colour can be customized)
4.Powder coated
5. Spray painted.
Packing:
Pallet or Wooden case with Water Proof Material or as your demands.
The term of expanded metal mesh:
1. SWD (Short Way of the Diamond) is the distance from the middle of the
bond on one side to the middle of the bond on the opposite side.
2. LWD (Long Way of the Diamond) is the distance across the largest
dimension of the diamond measured halfway between the diamonds.
3. SWO (Short Way of the Opening) is the width of the opening of the
shortest side of the diamond. SWO does not include the strand
width, where SWD (Short Way of the Diamond) does.
4. LWO (Long Way of the Opening) is the length of the opening of the
longest side of the diamond. LWO does not include the strand width,
where LWD (Long Way of the Diamond) does.
5. Strand and Bond Expanded metal is composed of strands and bonds. Strands form the
sides of the expanded metal openings. Bonds are where the strands
intersect. In other words, the bond is where each diamond shaped
opening is connected with the next opening.
6. Thickness is the measurement from the top surface to bottom surface of the
expanded metal piece.
7. Expanded metal Roll: that the specific length and width of the wound into the roll of
steel mesh.
8. Expanded metal sheet: The expanded metal that show specific length and width.
Shape Patterns:
diamond,round, hexagonal, square, and other special pattern can also be customized.
Specification:
Aluminum Decoration Expanded Metal Mesh | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Strands | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/2" .051 | 0.5 | 1.2 | 0.375 | 0.937 | 0.093 | 0.051 | 0.158 | 65 |
1/2" .081 | 0.5 | 1.2 | 0.375 | 0.937 | 0.093 | 0.081 | 0.186 | 60 |
3/4" .051 | 0.923 | 2 | 0.813 | 1.175 | 0.109 | 0.051 | 0.2 | 78 |
3/4".081 | 0.923 | 2 | 0.75 | 1.68 | 0.129 | 0.081 | 0.22 | 76 |
(Lt.) | ||||||||
3/4".081 | 0.923 | 2 | 0.75 | 1.68 | 0.165 | 0.081 | 0.3 | 69 |
(Lt.) | ||||||||
3/4".125 | 0.923 | 2 | 0.688 | 1.68 | 0.169 | 0.125 | 0.305 | 68 |
1-1/2".081 | 1.333 | 3 | 1.188 | 2.5 | 0.128 | 0.081 | 0.24 | 85 |
1-1/2".125 | 1.333 | 3 | 1.188 | 2.5 | 0.162 | 0.125 | 0.3 | 79 |
3. Features:
1. Weight is light enough for outer wall hanging
2. Anti-corrosive
3. Rainstorm or isolation won`t hurt
4. Visibility and colorful
5. Easily fabricated, finished, installed and formed
6. Continuity--the mesh is formed from a single piece of metal
7. Environment friendly--no wasteful of material
8. High strength--higher strength to weight ration then metal sheet.
4. Application:
1. Ventilation mesh, decorative mesh.
2. Protection mesh for machine, electric equipment, aquatic products breeding.
3. Screen for window, door, wall, ceiling, facade, roof, retail shelf, signage, partition.
4. Fence for highway, studio, garden, green belt, bridge, stadium.
5. Chimney caps and handcrafts.
6. Used in construction, concrete reinforcement, filtration.
7. Heavy expanded mesh can be used as stair for corridor, oil tank, working platform, escalator, walking road for big ship, heavy model equipment, petroleum well, mine well, boiler, footbridge.
Picture: