Add to Cart
Max. Swing Diameter-500mm 6250 Horizontal Gap-bed lathe machine
With 7.5KW Power
Specifications:
Model | CA6240 | CA6250 | CA6261 | CA6266 | CA6280 | ||
Max. swing over bed(mm) | 400 | 500 | 610 | 660 | 800 | ||
Max. swing over carriage(mm) | 210 | 300 | 370 | 400 | 540 | ||
Max. swing in gap(mm) | 630 | 720 | 830 | 880 | 1020 | ||
Effective gap length(mm) | 210 | 210 | 210 | 210 | 210 | ||
Max. length of work piece(mm) | 750 or 1000 or 1500 or 2000 or 3000 | ||||||
Width of bed(mm) | 400 | ||||||
Section of turning tool(mm) | 25 X25 | ||||||
Spindle | Spindle speeds(r/min) | 11-1600(24steps) | |||||
Hole though spindle(mm) | 52 (B-80 C-105) | ||||||
Morse No.6 | |||||||
Feed | No. of feeds | 64(kinds)(for each) | |||||
Range of metric threads(kings) | (1-192mm)(44kinds) | ||||||
Range of inch threads(kings) | (1-24tpi)(21kinds) | ||||||
Range of module threads(kings) | 0.25-48(Module 39 kinds) | ||||||
Range of diametral pitc threads(kinds) | 1-96DP(37kinds) | ||||||
Tailstock | Max. tailstock spindle travel(mm) | 150 | |||||
Tailstock spindle travel(mm) | 75 | ||||||
Morse No.5 | |||||||
Main motor(kw) | 7.5Kw(10HP) | ||||||
Picking dimensions ( LxMxH mm ) | G.W/ N.W. | ||||||
750 | 2440X1140X1750 | 2100/1900 | 2170/2060 | 2300/2180 | 2380/2260 | 2520/2400 | |
1000 | 2650X1140X1750 | 2190/2070 | 2260/2140 | 2380/2250 | 2570/2450 | 2720/2560 | |
1500 | 3150X1140X1750 | 2350/2220 | 2420/2290 | 2580/2450 | 2810/2640 | 2980/2800 | |
2000 | 3650X1140X1750 | 2720/2570 | 2790/2640 | 2940/2800 | 3050/2880 | 3260/3080 | |
3000 | 4850X1140X1750 | 3300/3200 | 3450/3300 | 3600/3450 | 3930/3690 | 4200/3890 |
The main performance characteristics:
1 Machine tool bed box, headstock and tailstock, pallet etc. the
binding surface between the manual scraping machine, after rigorous
testing, the precision and stability of the effective guarantee
machine.
2 The machine adopts high strength cast iron, copper and chromium
added special materials, bed width 400mm, bed rail quenching depth
4mm, effectively improve the wear resistance and stability of
machine tool.
3 Machine tool bed box lubricated system by the use of the
lubrication of the pump for lubrication, for the hot weather, to
ensure the cleanliness of the bed box and heat dissipation
characteristics, effectively extend the bearing and gear life.
4 Machine tool spindle using Wafangdian bearing, spindle hole
diameter 52mm, the precision grinding machine tool gear,
effectively improve the hardness, reduce machine noise.
5 Machine tool uses the domestic brand screw, wire mother uses the
high quality bronze alloy to guarantee the wear resistance and the
accuracy retention.
6 Machine tool with four position high strength tool, shank size:
25x25mm.
Application:
1 CA series of ordinary horizontal lathe is suitable for turning
inside and outside cylindrical surface, conical surface and other
rotating surface, turning various metric and inch, modulus and
pitch thread, and can carry out the work of drilling and pulling
oil groove, is a very versatile horizontal lathe, widely used in
all kinds of shaft and disc parts of the batch processing.
2 This series of lathe bed width in general lathe, rail width 400mm
has a high stiffness; guide rail surface is quenched by medium
frequency, and is durable.
3 The machine operation is flexible and concentrated, the apron
with fast moving mechanism. Using single handle vivid of the
operation, pleasant and good..
4 Machine tool structure rigidity and transmission rigidity are
higher than the general lathe, the power utilization ratio is high,
is suitable for the strong cutting.
5 Machine tool factory in strict accordance with the test
procedures for testing, and make a strong cutting test, to ensure
that the machine has a good accuracy and reliability.